Timemore C3 Pro hand mill
Timemore C3 Pro hand mill
The manufacturer Timemore has brought the successor to the popular Timemore C2 onto the market. The Timemore C3 finally fills the weakness of the C2 - the fast espresso fine grinding . A strong overall package in the mill segment under €100.
Product features Timemore C3
- Suitable for espresso and filter coffee coffee .
- The aluminum housing with a ribbed surface ensures a firm hold.
-
Latest generation of grinders from Timemore - made of stainless steel.
- The Grinding speed for 18g roasted APAS espresso beans , with a grinding level setting of 8.5 clicks (you can hit half a click with a little sensitivity between two click levels) , is approx. 45 seconds . With the Timemore C2 this takes about 2:30 minutes.
- The Grinding speed for 24 g filter coffee beans, with a grinding level setting of 18 clicks, is approx. 25 seconds .
- The capacity The bean input depends on the density and roasting of the coffee. For example, it holds 27.5g roasted APAS espresso beans ( Apas is a medium roast). With a bright one Filter roast (Yellow Bourbon) from Brazil is also up to 27.5g.
- Grind container almost also 27g. That's enough for 450ml of coffee or a double espresso.
- The crank handle is foldable , which means that the hand mill including the crank can be stowed away in a very space-saving manner - without the mill threatening to fall over.
- Weight: 495g.
- The dimensions are: 15cm high, 5.2cm in diameter.
- Color: Black
- Full product name: Timemore Chestnut C3
Why do we sell the Timemore C3?
The Timemore C3 is a strong overall package. It covers fine grinds for espresso as well as coarser grinds for filter coffee and all other preparation methods. What we enjoy is the grinding speed of this grinder. The beans are ground for a double espresso in under a minute. The foldable handle also eliminates the need to store the handle and grinder separately.
Setting up the C3 hand mill from Timemore
- First, the mill must be unscrewed.
- Now the click wheel is set to "0" by turning the click wheel clockwise until it can't go any further.
- The click wheel is then turned up again counterclockwise with the required number of clicks in order to set the correct grinding level for the desired type of preparation.
- In our test we achieved a good result for filter coffee at 18 clicks and for espresso at 8.5 clicks.
- When determining the grinding level, we recommend briefly writing down the tested settings in order to achieve a good result more quickly.
ATTENTION: Do not operate the hand mill in click levels 0-5, otherwise the grinder can wear out more quickly.
Further helpful information on using the Timemore C3 pro
Timemore C3 pro user manual
Here you can find the operating instructions in German in PDF format: Operating instructions Timemore C 3 pro
What to do if there is static charge in the regrind container?
If there is static charge in the ground container or if ground coffee gets stuck on the upper part of the grinder, we have a solution. If, after grinding, you loosen the bean container by just half a turn and tap it twice with your hand from below, the coffee will detach from the upper part of the grinder and the powder will lie cleanly in the container.
How do I clean a coffee hand grinder?
In a short blog post we describe how you can clean your Timemore C3 pro in just 3 steps. Click here for the article ( click ).
Click setting too coarse or too fine?
Can't find the right click setting for your coffee and your desired recipe because one click level is too fine, but the next is too coarse? There are two solutions here.
1. working with half a click. To do this, you set the click wheel between two click levels with a little sensitivity. We reliably apply this in our German academy.
2. you choose a grind that is a little too coarse. You increase the amount of coffee by 0.5-1g and adjust your extraction ratio accordingly.