Home / Coffee knowledge / The right coffee water - the coffee water guide
    Kaffeewissen
    Das richtige Kaffeewasser - die Kaffeewasser Anleitung

    The right coffee water - the coffee water guide

    Reading time: 4 minutes. This article is a short blog. You can find the detailed blog article here.

    Since your coffee drink consists of over 90% water and less than 2% dissolved coffee particles, it is worth taking a closer look at the water. Even though it tastes good as tap water in a glass, there are some criteria that make your tap water a good start for your coffee drink.

    How should good coffee water be?

    Basically, coffee water should be soft, usually softer than what comes from the tap. There are two parameters here:

    • Total hardness = Magnesium Mg+2 and Calcium Ca2+
    • Alkalinity = Bicarbonate = HCO3-

    For filter coffee, the best values are:

    • Total hardness: 2 – 3 °dH
    • Alkalinity: 1 – 2 °dH

    For espresso, the best values are:

    • Total hardness: 3 – 6 °dH
    • Alkalinity: 2 – 4 °dH

    Alkalinity is often also referred to as carbonate hardness, which is not strictly correct, but the term carbonate hardness has become established.

    This already sounds very complicated. We explain here how you can achieve such good values, as you will most likely not get such soft water from your tap.

    How good is my water at home?

    There are several ways to measure water hardness. A conductivity meter, a ppm meter, and a drop test (the simplest option). In the latter case, 10ml of your water is poured into a test tube and a few drops of test liquid are added. You count the drops and as soon as there is a color change, you know the water hardness. You also have the option of contacting your local water provider or visiting their website.

    How and what does the table water filter filter?

    Table filter devices are inexpensive and widespread. Water is poured in and a maximum of 50% of the water is decarbonized. The other 50% simply flows through the activated carbon filter of the device.

    A quick calculation example: From the tap we have drinking water with 16°dH total hardness and 12° dH alkalinity. After one pass through the water filter, the alkalinity is halved to 6° dH, but the total hardness only drops to 10° dH. Since this is still far from perfect coffee water, we need a second pass.

    After the second pass, the alkalinity is at 3°dH and the total hardness is at 7°dH. This is already good, but we only reach the perfect range with the third filtration (1.5° dH alkalinity and 5.5° dH total hardness).

    In some cases, table filter devices require 3 or more passes. Quite laborious!

    The water filter with permanent water connection

    A luxury is a water filter with a permanent water connection, that is, a permanently installed under-sink filter. It has higher and more consistent filter performance and filters the water directly to the desired value. Decarbonization takes place through ion exchange, which in turn changes the pH value of the water.

    But is this luxury necessary? If you have hard water and prepare a lot of coffee, it is worth purchasing. 90% of machine defects are due to water that is too hard. Considering the expensive purchase price of a good espresso machine that you will surely want to use for a long time, you should consider such a filter system. As a rule, it is cheaper to get an under-sink filter than to have the portafilter machine serviced once. In many cases, installation is easy, but it can also be carried out by a specialist.

    Another advantage is the reduced lime content in the water, which you will also notice immediately in your kitchen, as white deposits will be barely noticeable.

    Desalination systems are not an alternative!

    In some homes, the drinking water system is connected to a desalination system. This softens the water through ion exchange (calcium and magnesium are replaced by sodium), but alkalinity remains. This imbalance in coffee preparation means that the coffee tastes bland and boring, since the interplay of balanced acids and bitter notes does not work. The only way out here is to go into the garden, as the water hoses are usually not connected to the desalination system.

    Concrete approach to achieving your suitable coffee water

    We are happy to help you achieve the right water hardness at your home. Here's how to proceed.

    1. You measure your current water hardness with a drop test or ask your water provider.
    2. You estimate the amount of water you need per day.
    3. You send the total hardness and alkalinity (carbonate hardness) together with the amount of water and your type of coffee drink to support@kaffeemacher.de
    4. We will get back to you as soon as possible with specific recommendations on how you can achieve your target values.
    What do you think?