Home / Coffee knowledge / Coffee Hand Grinder Guide
    kaffeemühle hand
    Kaffee Handmühlen Guide

    Coffee Hand Grinder Guide

    In the coffee hand mill horizon, there is a wide range of no-name products for €20 up to mills that cost several hundred euros. We want to help you identify the right hand mill for you.

    In this article, we will also discuss the hand mills available in our online shop. However, the criteria and tips discussed apply generally and can be applied to other hand mills.

    Which hand mill is right for me?

    The choice of the right mill depends largely on what coffees you drink and what brewing method you use: espresso, filter coffee, French press, or Kaffeemacher.

    As a general rule: The finer the required grind size, the higher quality the hand mill and the grinding mechanism must be. Fine espresso grinds are, so to speak, the top league.

    This also means: The more espresso-worthy you want it to be, the higher the purchase price.

    Important factors for using a hand mill are also the build quality, durability, everyday practicality, and the grinding mechanism.

    Build quality and durability of hand mills

    In 2020, we conducted a comprehensive test of hand mills in the under €100 range. Many of the mills tested are no longer available today. In the test, we also noticed that some hand mills showed signs of deterioration during their first uses.

    Our tip

    Ask the seller before you buy whether they offer spare parts or repairs for the mill they are offering.

    What is the best hand mill grinding mechanism?

    You will find various materials from which hand mill grinding mechanisms are made. In the hand mill sector, we have not yet found a convincing ceramic grinding mechanism in our tests.

    All manufacturers of high-quality hand mills such as Comandante, Timemore, Etzinger, and Kinu rely on stainless steel grinding mechanisms.

    A look at the grinding mechanism types of electric mills shows that ceramic grinding mechanisms are sometimes used here and not exclusively stainless steel grinding discs.

    Timemore hand mills

    The shape of the grinding cones used in hand mills varies from manufacturer to manufacturer, as each manufacturer has developed their own patents and has these produced by large grinding mechanism manufacturers.

    The everyday practicality of hand mills

    The right ergonomics

    A very important factor is the everyday practicality of a hand mill. Even if a hand mill manages to achieve the right grind size for your preferred brewing method, that does not by any means mean that grinding will be easy to do.

    Many of the very inexpensive mills, for example, have a very thin crank that does not allow ergonomically comfortable grinding. Thus, everyday practicality is not given and the mill will quickly gather dust in the cupboard because it's simply not fun to use.

    Grinding speed

    The second important factor in daily use is speed – how long it takes for the beans to be ground.

    As a rule, you will find no information from the manufacturer or seller about this. The reason is that it is not uncommon for a hand mill to need more than 5 minutes for 18 g of espresso-fine ground coffee. It is important to add that the most transparent method of specifying grinding speed is the number of crank rotations required. How fast you turn is, however, very individual.

    Our tip

    Ask about the number of rotations required for an espresso grind size.

    Which hand mill for espresso?

    For making an espresso, very fine ground coffee is a prerequisite. It is therefore essential that the hand mill can grind fine enough.

    Attention: This is not the case with every hand mill, even though the manufacturer sometimes advertises it.

    It is also important that grinding is easy to do. This means: ergonomics, smooth operation, and grinding speed must form a working overall package.

    Our tip

    Look for hand mills that specify both a setting recommendation for espresso and a rotation or time specification for a standard amount of beans (18 g).

    Setting the grind size on a hand mill

    Almost all hand mills work with a click system. The challenge is therefore to find the right click setting for your desired brewing method in combination with the coffee you are using.

    Sounds complicated, but with the right information and guidance it's not that difficult. As a general rule: The lower the click number, the finer the ground coffee. However, you should avoid the lowest click levels, as the grinding mechanism could wear faster due to grinding (the grinding discs touch each other).

    Grind size adjustment on a hand mill

    What grind size for espresso?

    Setting the hand mill for espresso follows these steps:

    1
    Use the manufacturer's click recommendation. What click recommendation does the mill manufacturer provide for espresso? This is a good starting point, but it is very likely that this is not yet the setting for "your" espresso.
    2
    Determine the extraction ratio. A standard recipe, for example valid for our APAS espresso, is 1:2.5 in 25 seconds. This means: From 18 g of ground coffee, 45 g of drink in the cup for a double espresso (for two single espressos you place two cups underneath and have accordingly 2 × 22.5 g as the result). The whole thing in 25 seconds.
    3
    Adjust the grind size. If the espresso runs too quickly through the portafilter machine, the grind size must be set finer. If the espresso runs too slowly, the ground coffee must become coarser – you increase the click number.
    4
    Fine-tune between two click levels. If you don't hit a recipe exactly (e.g., click level 7 is too fine, but click level 8 is too coarse), you have two options: With some mills, you can position the click wheel between two click levels. If that doesn't work, you can use 0.5–1 g more coffee and adjust the ratio accordingly. This provides a bit more ground coffee in the portafilter, which also reduces the flow rate.
    18 gGround coffee
    45 gEspresso in the cup
    1:2.5Ratio
    25 sBrewing time
    Our tip

    Ask the seller for the recommended grind size setting for your brewing method.

    What grind size for filter coffee?

    For filter coffee, first orient yourself to the click recommendation of the mill manufacturer or seller for your filter coffee method.

    From the AeroPress to the classic V60 hand filter to the plunger pot, i.e., the French press, an increasingly coarser grind size is required.

    The seller or the mill manufacturer should provide click recommendations for these grind sizes.

    Which hand mills do we sell?

    We work intensively with the topic of hand mills every day. Based on our experience, we have put together our hand mill range.

    There are many coffee hand mill manufacturers and even more different models. We have deliberately chosen the selection we offer because we want to make it easier for you to decide. In our view, it makes no sense to offer dozens of hand mills – that would only make the decision more complicated.

    Hand mill Special feature
    Timemore C3 ESP Pro Very strong price-to-performance ratio with good manufacturing quality
    Timemore Slim 3 Made from one piece of aluminum, impresses with design and quality
    Comandante C40 MK4 Premium segment, manufactured in Germany, with RedClix very finely adjustable
    Comandante X25 Trailmaster For outdoor use, grinding properties comparable to the C40 MK4
    Kinu M47 –

    The Timemore C2 and Timemore Slim Plus are no longer produced by Timemore, so we have expanded the range with the two successor products Timemore C3 ESP Pro and Timemore Slim 3.

    Good to know

    All mentioned Timemore hand mills come from the Timemore Chestnut series. You will occasionally find the designation Timemore Chestnut Slim 3 or Timemore Chestnut C3 Pro. These are the same hand mills as listed in the table above.

    Our hand mill range in detail

    These four hand mills cover a wide range of coffee.

    Timemore C3 ESP Pro

    The Timemore C3 ESP Pro offers a very strong price-to-performance ratio with good manufacturing quality.

    Timemore Chestnut C3 Pro

    Timemore Slim 3

    The Timemore Slim 3 offers an excellent price-to-performance ratio, is made from one piece of aluminum, and impresses with design and quality.

    Timemore Chestnut Slim 3

    Comandante C40 MK4

    The Comandante C40 MK4 is a high-quality hand mill from the premium segment and is manufactured in Germany.

    Comandante C40 MK4

    With the optional RedClix extension, the Comandante C40 MK4 can make very fine adjustments in the espresso range. In terms of adjustability of a precise grind size, the Comandante C40 MK4 with the RedClix extension achieves full marks.

    Comandante C40 MK4 with RedClix upgrade

    Comandante X25 Trailmaster

    The latest hand mill in our range is the Comandante X25 Trailmaster. Here too, the RedClix axis can be installed. The grinding properties are comparable to the Comandante C40 MK4.

    The Trailmaster is especially suitable for outdoor use. We took a closer look at this mill in this video.

    What do you think?