Admittedly, the title is a bit sensationalized. However, the Sage Barista Express Impress aims to bridge the sometimes somewhat complicated world of portafilter machines with the simple and clean world of fully automatic coffee machines. It wants to combine the comfort of automation with the precision of a barista and promises delicious espresso – with almost no effort. But is that even possible? Is the machine a jack-of-all-trades or a poor compromise that doesn't really make anyone happy?
What's New About the Barista Express Impress?
Sage promotes the Barista Express Impress as a semi-automatic coffee machine. "No stress. No effort". The target audience for the machine is actually clear. Sage targets people who want a stylish and high-quality coffee machine with portafilter feel, but don't want to deal too much with the work of a barista. Brew recipe, flow temperature, grounds distribution, leveling, tamping, channeling? The purchaser of an Express Impress barely needs to worry about these things.
On the other hand, the machine is by no means a fully automatic machine. If you have it at home, you can't just press a button and have a clean cup of coffee ready in seconds. The Sage Barista Express Impress doesn't take all the work off your hands, just part of it. It tries to position itself between the worlds of a portafilter machine and a fully automatic machine – and this only works moderately.
You can make really delicious espresso with the machine, but to be honest, you often have to put in more effort than with a classic portafilter machine like the Barista Express, the predecessor to the Impress. You have to work with the machine's preset automatic settings or even bypass them – and that's not easy.
If, on the other hand, you use the machine without thinking too much about it – in the sense of "no stress, no effort" – you'll hardly get to enjoy a really delicious espresso.
That's why we decided to write not only a normal test report of the machine but also a section with tips and tricks. Additionally, we're currently developing an online course that guides you step by step to really get everything out of this machine. So if the Barista Express Impress is already on your kitchen counter and your espresso doesn't taste good, you should definitely sign up for our online course.

The Exterior of the Sage Barista Express Impress
The Barista Express Impress presents itself in typical Sage design and is available in silver stainless steel and black. It features a built-in grinder, based on the solid entry-level Sage Smart Grinder Pro grinder, and holds 250 g of beans in the hopper. The water tank has a volume of 2 liters, while the drip tray holds about 1 liter. The package includes a water filter system, which allows you to use normal tap water without having to run it through separate filters. This works well!
The machine is a thermoblock machine. It doesn't heat one or two separate boilers but uses a thermcoil. This type of flow-through heater makes it possible to bring the machine up to operating temperature in a short time. Unfortunately, this doesn't work as well as with other thermoblock machines – more on that later.
Sage also uses a 54-mm portafilter system for the Barista Express Impress. So if you want to buy standard accessories for 58-mm portafilters, they won't fit your Sage machine. While that's a shame, we're used to it by now with Sage.

On the front of the machine, next to the power button, are buttons for single and double shots as well as a button and rotary dial for adjusting the grinder. The machine features so-called volumetrics, which allows you to set the amount of water flowing through for the espresso so you don't have to measure with a scale on every shot. The volumetrics aren't perfectly accurate, but they work quite well. The pressure gauge is a nice gimmick, but the displayed pressure is no guarantee of a delicious espresso.
On the left side of the machine is the "tamper lever", probably the machine's greatest innovation. This is where the coffee grounds are compressed after grinding. At the same time, it analyzes whether the portafilter is full enough or too full.
The grinder in the Barista Express Impress is essentially based on Sage's Smart Grinder Pro. The grind size can be adjusted finely and precisely, and it can definitely grind espresso-fine. If the preset range on the side dial isn't enough for your coffee, you can also do a coarse adjustment in the burr set itself. We made a video about that.
The package contents are quite satisfactory. There's a milk pitcher, filters, a water filter, and all sorts of other useful accessories. Even a cleaning program is built into the machine, which is an absolute rarity in machines in this price range. All in all, the workmanship and package contents are at a normal and very good Sage level. How do I prepare an espresso with the Barista Express Impress?

How Do I Prepare an Espresso with the Barista Express Impress?
You take the warm, clean, and dry portafilter and lock it under the grinder. The portafilter is automatically pulled to the correct position so that little coffee grounds fall out.
Then you press the grinder button and wait about 10 seconds until the ground coffee is in the portafilter. The machine now indicates that you should operate the "tamper lever" on the left side. When you press the lever down, the machine shows how full the portafilter is. Ideally, a smiley lights up – then you have the right amount of coffee powder in the portafilter. If the display shows too little or too much, you need to adjust the grinding time in manual mode with the rotary dial to optimize the fill amount in the portafilter. This display can be useful and helpful for beginners.
More coffee powder doesn't automatically mean "better coffee". The coffee swells when it comes into contact with water. This pushes it against the shower head, which, depending on the shower head and properties, can cause uneven extraction. That's why you should always be careful not to overfill the portafilter! By the way, there's also always a minimum fill amount so that the coffee powder can build up enough resistance.
Now you flush the brew group once without the portafilter to clean the shower head and bring it up to temperature. Then you lock in the portafilter, place your cups underneath, and press the button.
For a cappuccino, you froth the cold milk with the steam wand. With the Sage Barista Express Impress, this takes a bit longer, but the steam power is sufficient to produce fine microfoam. Thanks to the thermoblock principle, the temperature change from brewing to steaming and back is quite fast, which we also liked.
All in all, it's relatively simple and straightforward to prepare your coffee daily with the machine's automatic functions.
But the question remains: Does automatic tamping immediately after grinding really guarantee good espresso extraction? We come to the problems with the Express Impress:
Problem 1: Coffee Puck Preparation
The process with a traditional portafilter machine involves tapping the portafilter after grinding to distribute the coffee grounds evenly. There are even levelers that create a flat surface, or espresso distributors that break up the coffee grounds before tamping.
Why is this important? Ideally, the coffee grounds should be distributed evenly and without lumps in the portafilter. Then the coffee grounds are evenly compressed by tamping. If everything is done correctly, the espresso is extracted evenly across the entire area of the portafilter.
However, if the coffee grounds weren't distributed evenly, there will be areas in the portafilter where the espresso water flows through faster and others where it flows through more slowly. This causes the coffee to be partially over-extracted (too long extraction) and partially under-extracted (too short extraction). Under-extracted espresso tastes sour, over-extracted espresso tastes bitter.
Poor puck preparation in the portafilter thus leads to an unbalanced espresso in the cup. A good barista is recognized especially by the fact that he takes a lot of time to prepare the puck in the portafilter. What does this mean for the Barista Express Impress?
Since the process of grinding and tamping is automated, we have no control over the result. The coffee grounds don't fall evenly into the portafilter but, due to the process, form a small mound. If we don't shake the portafilter and don't distribute the grounds but simply pull the lever, the machine tamps an uneven mound. The result is an uneven coffee puck. Additionally, the tamper doesn't sit flush with the portafilter, leaving a rim on the outside that is barely or not compressed at all.
A word about the dosing automatic mode: If you don't have enough powder in the portafilter, the smiley doesn't light up when tamping and the machine prompts you to press the grind button again. Then the machine grinds for another second and creates a mound on top of the already tamped coffee cake when tamping again. This surface is so inhomogeneous that the espresso can never taste good. The dosing automatic actually prevents a satisfying coffee experience.
The espresso you prepare with all this imprecision is therefore always a compromise between "too sour" and "too bitter" and never tastes really round and balanced. However, there are coffees that forgive a lot and taste good despite the inaccurate preparation, such as our Apas Organic Coffee.
At the end of the article, you'll find a small trick to distribute the coffee grounds better.
Problem 2: Temperature
Sage already has several thermoblock machines on the market, including the Sage Bambino and the Barista Pro, both equipped with a thin-film heater. The great thing about these devices is that after a warm-up time of just a few seconds and a flush of the portafilter, the brew temperature for the espresso remains constant and at a good level of around 90 °C or better 92 °C.
The problem with these machines was that they were set too hot. Sage had argued in the past that after switching on, they let the machines heat up too high to also warm the portafilter. With the Barista Express Impress, Sage now takes a different approach. And heats up more carefully.
After switching on, the Impress shows it's ready to use after about 40 seconds. However, according to our measurements, the Barista Express Impress doesn't even reach a temperature of 90 °C after 5 minutes. After a flush shot to preheat the portafilter, the brew temperature on the first preparation after 5 minutes is around 84 °C. This espresso tastes sour and undrinkable. Only after 3-4 brews does the machine reach temperatures of 90-92 °C. Even after 10 minutes, it still takes 2-3 brews to reach the desired temperature.

To really ensure that the first espresso can be prepared perfectly, a warm-up time of up to 25 minutes is required. This is otherwise needed only by large dual-boiler machines and not by a thermoblock machine.
We found a hack for how to shorten the warm-up time. You'll find it too at the end of the article.
Problem 3: Brew Ratio
To brew consistently delicious espresso, you follow what's called a brew ratio or brewing recipe. The amount of ground coffee is put into a ratio with the milliliters of drink in the cup. We often recommend 1 gram of coffee grounds for 2.5 grams of espresso in the cup (brew ratio 1:2.5). Because the machine controls the coffee amount automatically and manual control is also rather imprecise, we don't really know exactly what brewing ratio we end up with. So it's a guessing game whether the semi-automatic espresso tastes good. Sometimes an espresso turns out well, sometimes it doesn't. That's not really satisfying.
Tips and Tricks
Since we deal very intensively with machines, measure them, and sometimes even take them apart, we often come across small hidden functions or hacks. We introduce you to two tricks that will definitely make your espresso from the Barista Express Impress taste better. But to dive into every detail of the machine, you should sign up for our online course!
Fast Heat-Up
If you buy a thermoblock machine, you certainly don't want to wait 25 minutes for your first cup of espresso. With a so-called fast heat-up, you can bring the machine up to temperature faster.
For this, you turn on the machine normally. Once the machine has "heated up" after 40 seconds, place a milk pitcher under the steam wand and turn on the steam for about 2 minutes. Because milk frothing requires a much higher temperature than brewing, this process causes the machine to get "too hot".
When you then lock in the empty portafilter and flush once, you're at the ideal espresso temperature. Another great advantage of the method is that the temperature curve remains more stable during subsequent espresso brews than without it.
If we're honest, however, it's not a really elegant solution. Who wants to hear their fancy new espresso machine loudly steaming away for minutes before it's even ready to go? This hack is useful, but that's not how we'd want it!
Puck Preparation
To prepare the coffee puck better and more homogeneously, you can remove the portafilter from the machine after grinding. Then tap it with the palm of your hand ("karate chop") and gently tap it on the work surface. This closes air channels created during grinding and creates a homogeneous surface.
Now you can lock the portafilter back under the grinder and pull the tamper lever. Or you can tamp outside the machine with an external 54-mm tamper.
This way, the espresso is extracted much more evenly and you get a more balanced drink where sour and bitter flavor notes are much more balanced.
Conclusion: Automation at Its Worst
Automation sounds good, progressive, and somehow sexy. We think of everyday conveniences, reduced production errors, and consistent quality. Thus, the step Sage takes with the Express Impress would be completely understandable: portafilter quality and yet little work.
In our opinion, however, the concept doesn't work at all. The automation takes the most important processes in espresso preparation out of your hands as a home barista and does them much worse than you could do them yourself. That's not automation, that's deterioration.
After extensive testing, we conclude that you can only make delicious espresso with this machine if you bypass a large part of the "innovations" and brew the espresso as traditionally as possible. However, this is more cumbersome than with a regular portafilter machine.
If you already have the Express Impress at home, it's possible for you with our tricks and our online course to make good espresso. However, if you're only thinking about buying the machine, we advise against it!
![]()
















