The WPM ZP-1 is a single dosing espresso grinder for 1,140 euros / 1,180 CHF. WPM comes from Hong Kong, has been active in the milk jug segment for years, and has made a name for itself with thermoblock espresso machines. The ZP-1 is their first grinder venture on the European market. Like all our grinders, we purchased it ourselves and put it through our test protocol. What came out: The ZP-1 does several things really well. But at 1,140 euros, you can ask what you're getting that you couldn't get elsewhere for less.
Overhang and a dial that's fun to use
The ZP-1 weighs 8 kg, is around 13 cm wide, 27 cm deep, and just over 30 cm high. The housing is strongly tilted forward; the grinder has noticeable overhang. Whether that looks right is a matter of taste.
The grind adjustment dial is not a matter of taste. It's oversized, precisely engraved with 30 main markings and 4 subdivisions each, and infinitely adjustable. One of the best adjustment dials we've ever tested. During operation, you feel a natural and pleasant resistance that allows for the finest corrections. Minor criticism, however: The pointer arrow isn't quite optimally positioned, and the spacing between subdivisions is so large that you have to actively use the intermediate ranges. For a dial of this size and this standard, more subdivisions would make sense.
The discharge spout is magnetically removable. In terms of premium appearance, it's the only element of the grinder that falls slightly short. It's made of plastic, which is only noticeable when you remove it. It's otherwise coated exactly like the rest of the grinder. The manufacturer states that the plastic discharge reduces static buildup.
The integrated knocker works well and eliminates the need for a bellows. It works reliably with light and medium roasts. With dark roasts, a bit more sticks.

Buy WPM ZP 1
🛠️ Source in Germany and Austria *: Bean Dealer
*We search for specialized partners for you, from whom we know they provide good work and good service. We are in close contact with the dealers. These are affiliate links. If you order through this link, it doesn't cost you more, but we get a small commission that we invest in new test equipment. We continue to work on this and are looking for competent partners for you in the DACH region.
Burrs and cleaning. The best we've experienced so far
64 mm flat burrs are installed in the grinding mechanism, more precisely 63.8 to 63.9 mm, which means that SSP discs don't fit directly. WPM supplies an adapter with which SSP discs can be mounted.
The RPM control ranges from level 1 (600 rpm) to level 10 (1,300 rpm). What this means for particle distribution, we clarify below.
When it comes to cleaning, the ZP-1 sets a standard that has been unmatched so far. In just a few steps, without adjusting the grind, you have access to the grinding chamber. No tools, no screwing, no settings to remember. Zip, open, brush out, back together. By the way, you can use the cleaning agent here significantly less often than with grinders where you're reluctant to open the grinding chamber.
Grinding speed and noise level
The ZP-1 handles 21.5 g in 10 seconds, which is a medium-fast grind. For 18 g, the grinder needs 12 seconds. Not a record, but not an everyday annoyance either. The grinding time gives you time to put the lid on, which reduces the noise level from 85 to 80 decibels (in case of the highest RPM). At RPM 1, it's 80.8 dB(A) or 75 dB(A) with the lid, which falls into the quiet category. Great.
Grinding temperature and consistency
The first sample is at 31.3 °C, after five consecutive grinds with 20 seconds pause each, the ground coffee rises to 32.6 °C. The average is 32.02 °C. That's good. Even light, aromatically sensitive roasts aren't thermally stressed, and if you pull multiple espressos in a row, you don't have a temperature problem to worry about.
The consistency is also convincing. A standard deviation of 0.11 g over 15 grinds is very good. For anyone who relies on reproducible recipes, there's a reliable foundation here.

Retention. Surprisingly little for this space
When you see the grinding chamber of the ZP-1 open for the first time, you get worried. The space around the discs is generous; visually, a retention of more than one gram wouldn't be a surprise. The measurement shows 0.5 g temporarily, 0.2 g permanently, 0.7 g absolute. That's very good.
0.5 g temporary retention means that half a gram from the previous grind is mixed in with every grinding operation. Barely noticeable in everyday use. If you switch between light and dark beans, you grind through two or three purge beans, then the transition is clean. The permanent retention of 0.2 g is minimal and uncritical for the aroma climate in the grinder. That the ZP-1 maintains this value despite the generous space is a solid engineering achievement.

Grind setting replicability
In the adjustment test (espresso, ristretto, lungo, return to espresso), the ZP-1 shows a peculiarity. The x50 value of the initial setting (T4) is 254.6 µm, after the return (T7) it's 225.9 µm, a deviation of almost 29 µm. At the same time, the fine portion increases from 28.7% to 35.3%. The grinder thus returns to the right range, but doesn't hit exactly the same position.
Since we achieve almost exactly the same particle distribution in repeated T4 measurements (T4-1, T4-2) with different RPM, we consider the T7 measurement to be an outlier. We also had no difficulty finding the exact grind setting again when switching between recipes.

Particle distribution. Well-rounded, RPM has no effect
We analyze the particle distribution in cooperation with ZHAW Zurich using the Retsch Camsizer X2.
In the espresso setting (T4, RPM 5.5), the x50 value is 254.6 µm, the fine portion (Qf <100 µm) is 28.7%, and the 60% main peak width is 230.7 µm.
A fine portion of 28.7% is in the medium to lower range. The cup comes out transparent, the acidity is clearly structured, body remains rather restrained.
The main peak width of 230.7 µm sits in an interesting sweet spot that reliably grinds both light and darker roasts. For very light roasts where maximum clarity is desired, switching to SSP discs would be a good move.
RPM comparison. We took separate PVM samples at RPM 1 (600 rpm) and RPM 10 (1,300 rpm), and calibrated the recipe to 18 g in, 45 g out, 25 seconds. The main peak width remains nearly identical; at RPM 1 it's 233.6 µm, at RPM 10 it's 231.0 µm. Unlike other grinders with variable speed, where the RPM setting noticeably shifts the particle distribution, the ZP-1 with its factory burrs shows barely any effect. The RPM function is present, but changes hardly anything with the standard discs.
Tasting
For the PVM measurements and all grinding samples, we use our reference coffee as always, the Apas Espresso, a naturally processed Brazilian coffee from the APAS Cooperative. In the video we brewed Yulieth, a washed Pink Bourbon from Colombia, which shows what the ZP-1 brings out of light roasted coffees. The acidity was clearly structured, the finish long and fruity. Not an espresso with a lot of body, but a balanced shot with a lot of transparency, exactly what the moderate fine portion of 28.7% suggests.
Conclusion. Very good overall package with an open question
The ZP-1 is a well-thought-out, solid single dosing grinder. The grind adjustment dial, with its size, ranks among the best we've had on the bench. The accessibility of the grinding chamber is simply unmatched. The retention is very low despite the large space. Thermal stability is convincing.
Strengths
- Grind adjustment dial precise, infinitely adjustable, pleasant to use
- Cleaning: fastest access to the grinding chamber we've ever tested
- Absolute retention 0.7 g, very good for this space
- Grinding temperature 32 °C, thermally unproblematic
- Low static, interesting particle distribution suitable for many roasts
Weaknesses
- RPM function has no measurable effect on particle distribution (with factory burrs)
- Grind setting replicability between T4 and T7 not reproducible, likely due to coarse detents and distant pointer
Who is the WPM ZP-1 suitable for? Anyone looking for a high-quality single dosing grinder, works daily with light to medium roasted coffees, and experiences cleaning not as a chore but as a quick step, is well served with the ZP-1. Also for frequent bean switchers, 0.7 g retention is more than sufficient.
Who is it not suitable for? It remains unclear to us what the 1,140 euro purchase price justifies when similar grinding discs and particle distributions are sometimes available for 500 to 800 euros. And grinders like the Timemore models (64 and 78) offer light roast enthusiasts a more interesting particle distribution right out of the box.
One thing is clear in any case: The quality of the ZP-1 speaks for itself.
We purchased our WPM ZP-1 model from jeronimo coffee in Switzerland.
Test results: WPM ZP-1
Rating according to the KM test protocol for espresso grinders. All measurements taken by us. We measure noise according to protocol with the lid in place, here at RPM 10. At RPM 1, it's 75.2 dB and thus a green value. Particle distribution doesn't have its own row because it's expressed in espresso potential.
Technical specifications at a glance
| Property | Value |
|---|---|
| Price | 1,140 EUR / 1,180 CHF (as of January 2026) |
| Disc size | 64 mm (63.8–63.9 mm) flat burr |
| Operating mode | Single dosing |
| Grinding speed | 21.5 g / 10 sec | 12 sec for 18 g |
| Noise level | 80.8 dB(A) (RPM 1) | 85.2 dB(A) (RPM 10) |
| Grinding temperature | 31.3–32.6 °C (first to last sample) |
| Absolute retention | 0.7 g (of which 0.5 g temporary, 0.2 g permanent) |
| Consistency (Std Dev) | 0.11 g |
| x50 (Espresso T4, RPM 5.5) | 254.6 µm |
| Fine portion Qf <100 µm (T4) | 28.7 % |
| 60% main peak width (T4) | 230.7 µm |
| RPM control | Yes, levels 1–10 (600–1,300 rpm) |
| Weight | 8 kg |
| Dimensions (W × D × H) | approx. 13 cm × 27 cm × 30 cm |
| Special features | Integrated knocker, immediate grinding chamber accessibility, magnetic dosing cup, SSP possible via adapter |
* Prices incl. VAT, as of January 2026.
















