Home / Coffee knowledge / 20 mistakes when making espresso
    Allgemein
    20 Fehler beim Espresso zubereiten

    20 mistakes when making espresso

    There they stand. The sleek espresso machine and the high-quality grinder, both polished to a high shine and perhaps already sent to a friend or two in a photo. But you're standing in front of them somewhat frustrated because your espresso just won't turn out right? Too sour? Too rancid? Somehow not convincing?

    In this article, we go through 20 mistakes in preparing your espresso. If you follow all the tips, that's a good step towards a good espresso. Let's get started:

    1. The dirty portafilter

    The portafilter should be clean and free of old coffee oils. Please regularly remove the basket from your portafilter and clean both the back of the basket and the inside of the portafilter.

    2. The dirty espresso machine

    Residue also remains in the shower head. Old coffee grounds, oils or other contaminants. Regular cleaning is a must. You can find out how to do it here.

    3. Uneven tamping

    Water is pressed with pressure through the espresso puck. The water finds the path of least resistance. If you tamp unevenly, it leads to uneven extraction and your espresso won't extract properly.

    4. Distributing the ground coffee in the portafilter

    Before you tamp evenly, you should first distribute the grounds evenly in the portafilter. Most grinders don't distribute the grounds evenly on their own, so you should do this with your finger or a leveling tool. If you don't distribute the grounds, you risk uneven extraction and channeling. We typically don't use a leveling tool, but instead gently smooth the grounds with your finger and then tap the portafilter twice gently on the tamping mat. We call this vertical compression.

    5. The machine is not hot enough

    Every machine needs time to heat up before the first shot. A blank shot can help with this too. Best of all, use the time before your first shot of the day to grind a little powder from the grinder to "clean" the retention. That way, your first espresso of the day will taste good too.

    6. Not flushing beforehand

    After each espresso, you should flush water through the shower head once. You clean the shower and normalize the temperature for the next shot.

    7. Wrong tamper size

    The size of the tamper should fit your portafilter as precisely as possible. There are very fine differences, e.g. 58mm or 58.5mm. The better the tamper compresses the entire coffee puck, the more consistent the extraction.

    8. Poor grinder

    The grinder is almost even more important than the espresso machine, as you need to set the right grind size and the particle distribution should be balanced. This is the only way your espresso can be consistently good.

    9. Old burrs in the grinder

    Burrs must be sharp, otherwise they squeeze the beans instead of cutting them. They need to be changed from time to time. Don't worry, it's not necessary every year, but usually only after several years.

    10. Cups on the machine

    The cup should sit on the bottom of the cup on the machine. The lower part of the cup is warmed through and the espresso doesn't cool down too quickly. This way is also more hygienic.

    11. Old coffee

    It's best to put only as much into the grinder as you consume in a maximum of 48 hours. Not too much time should have passed since the roast date either; ideally you consume the coffee within the first 4-8 weeks after roasting.

    12. Fresh coffee

    Fresh, but not too fresh. The coffee needs at least a week to degas CO². That's why you should wait at least this week before using it.

    13. Channeling

    Channeling means channel formation within the coffee puck. Water runs through this channel too quickly, resulting in underextraction. Your espresso is sour. Carefully lock in the finished tamped portafilter and don't tap it against anything so that no cracks form in the coffee puck and thus no channeling occurs.

    14. Hard water

    Too many minerals make the water hard and that's not good for your machine or for the coffee taste. The acidity is no longer properly integrated into the drink. Water that's too hard can have a massive impact on the lifespan of your portafilter machine. If your water is too hard, you need to filter it or resort to purchased water. You can find out what hardness level your water has from your water supplier or more precisely if you test it yourself (with the water test kit).

    15. Wrong grind size

    The extraction should take between 25-35 seconds. If the coffee flows too quickly, it becomes sour (underextraction); if it flows too slowly, it becomes bitter (overextraction). You regulate the flow rate through the grind size of the grounds. Too fast, then you need to set a finer grind. Too slow, then you need coarser grounds.

    16. Brewing ratio

    In espresso preparation, there are so-called brewing recipes. How many grams of ground coffee become how many grams of espresso drink. We recommend a brewing ratio of 1 to 2.5 or even 1 to 3 (10 grams of coffee becomes 25 or 30 grams of espresso). The brewing recipe is rounded off by the shot time, which is in the range of 25-35 seconds. The "sweet spot" varies depending on the coffee, and each person has their own taste. In our coffee descriptions, we always give you a brewing recipe for how we find this coffee most delicious. This can serve as a basis for "your" brewing ratio. You can find more on this topic in our blog post How much coffee per cup.

    17. Please stir

    Please stir the espresso in the cup after extraction. This distributes all extraction phases together and your espresso will taste more balanced.

    18. Wrong coffee

    Not bad, but wrong. Espresso should be brewed from espresso beans. Filter coffee, for example, is roasted much lighter, which doesn't work well with the espresso preparation method.

    19. The temperature

    The temperature at which the water hits the coffee puck should be between 92 and 93.5 degrees. You usually achieve consistent temperature with intermediate flushing. Both too high and too low temperatures significantly change the result in the cup.

    20. Poor coffee

    Even if you buy the right bean type, there are big differences in coffee quality. It's best to source your coffee from local or transparent coffee roasters who understand their craft and can advise you. If a coffee, for example, doesn't have a roast date printed on it, the age is unknown and the coffee is usually not fresh, but old.

    After naming 20 mistakes, our article Prepare espresso - step by step will help you with further questions.

    If you've just switched from a capsule machine to a portafilter, you should read our Beginner's guide for capsule switchers first. Many of the mistakes here occur in the first few weeks — and with the right setup, they happen less often.

    All 20 mistakes have been named. The complete process with standard recipe, the path to the right grind size, and a troubleshooting table can be found in Prepare espresso.

    What do you think?