The Moccamaster has an almost legendary reputation. It is appreciated for its design, craftsmanship, durability, and the quality of coffee it produces. This piqued our curiosity. We subjected the brewer to an intensive test. We tested 40 brews with different coffees, brew ratios, and quantities.
Our results are significantly more nuanced than the many positive online reviews. But let's start from the beginning. As a Kaffeemacher, one thing is especially crucial for us: the quality of coffee in the cup.
The following parameters are essential for this: the temperature of the brewing water, the distribution of brewing water over the coffee, and the rate at which coffee water is added.
The choice of coffee and grind size are important, but cannot be influenced by the machine. We still provide tips for suitable coffees and an appropriate grind size.
Moccamaster Instructions – One Button for Coffee
Operating the Moccamaster KBG 741 is really very simple. The Moccamaster hardly differs from most other filter coffee machines in this regard. Insert the filter, weigh out the coffee, pour water into the permanently mounted water tank, and start with the push of a button. We wouldn't be a Kaffeemacher if we didn't refine these instructions.
We generally recommend rinsing the paper filter thoroughly with hot water. This reduces the paper taste that would otherwise overlay the coffee later. A positive side effect is that the coffee filter paper then adheres better to the edges of the filter holder. This reduces the likelihood of the paper filter folding inward and water bypassing it. You can't rinse too much water through, but 300 ml is a good amount.
Then add the correct amount of coffee powder. The right dosage depends on the desired drink quantity. A good standard value is 60 grams of coffee per liter of water. We discussed this in more detail in a detailed blog post.
We initially made two brews. 18 grams of coffee and 300 ml of water, as well as 60 grams of coffee and 1000 ml of water. Each quantity was added. We also weighed the water. We started the brew with the push of a button. We compared these two brews to each other by taste.
18g and 300 ml vs. 60g to 1000 ml
In the comparative blind tasting of the two brews, the brew with the larger volume performed significantly better. Better in this case meant that the coffee tasted more balanced and homogeneous. It was also noticeably stronger, that is, more intense in flavor. The 18g/300g brew had, on the one hand, a slightly unpleasant acidity and on the other hand did not show the complexity and expected flavor notes of the coffee.
We adjusted the grind size of the 18g/300g slightly finer and made further brews. However, the result did not improve significantly. As you can see in Table 1, the strength in particular, that is, the concentration of dissolved coffee particles, was relatively low at just over 1.0% on average. This value can be measured with a refractometer. A desirable result is about 1.1 – 1.5% strength (TDS = Total dissolved solids), with the rest of the drink containing water. Finer grind sizes normally increase the resistance in the coffee, which leads to slower runoff of brewing water and thus more intensive extraction. However, by refining the grind size, we could not achieve significantly stronger brews with the coffee and water quantities used.
| Grams | mg | Water | Output | Strength | Extraction | Brew time | Drip cycle |
| 18 | 11 | 300 | 250 | 1.06% | 14.72% | 02:02 | 01:13 |
| 18 | 11 | 300 | 264 | 1.04% | 15.25% | 02:04 | 01:08 |
| 18 | 11 | 300 | 264 | 1.02% | 14.96% | 02:00 | 01:09 |
| 18 | 11 | 300 | 260 | 0.98% | 14.16% | 01:55 | 01:08 |
| 18 | 11 | 300 | 255 | 1.08% | 15.30% | 02:05 | 01:10 |
Table 1.
The extraction target is 18 – 22%. Extraction refers to the portions of the coffee bean that are removed from it. When you achieve higher extractions, the strength in the cup is also more pronounced. These two values are therefore dependent on each other (see also the blog post on Strength and Extraction).
Table 2 shows the results of the 60g/1000g brew. Here we achieved stronger results with the same brew ratio. The strength is on average above 1.2% TDS and thus in the target range. Accordingly, extraction is also in the target range for two of five brews. In theory, we could have increased extraction with a finer grind size. However, the flow through the filter was too slow and the water level was at maximum. A finer grind size would have caused the filter to overflow.
| Grams | mg | Water | Output | Strength | Extraction | Brew time | Drip cycle |
| 60 | 12 | 1000 | 887 | 1.21% | 17.89% | 04:33 | 03:32 |
| 60 | 12 | 1000 | 882 | 1.30% | 19.11% | 04:40 | 03:42 |
| 60 | 12 | 1000 | 896 | 1.12% | 16.73% | 04:21 | 03:27 |
| 60 | 12 | 1000 | 880 | 1.22% | 17.89% | 04:36 | 03:40 |
| 60 | 12 | 1000 | 886 | 1.23% | 18.16% | 04:33 | 03:33 |
Table 2.
The comparison of the brews shows that the extraction yield of the Moccamaster is better with larger brew volumes. This is mainly due to the distribution of water over the coffee bed. With larger brew volumes, the brewing water better captures all coffee particles and washes them out more effectively. This is mainly due to the design of the brew head.
Buy Moccamaster
The following specialty retailers* carry the Moccamaster KBG Select and we can recommend purchasing from these businesses.
Germany: Espressopool
* We search for specialty partners for you, knowing they provide good work and good service. We are in close contact with the retailers. These are affiliate links. If you order through this link, it won't cost you more, but we receive a small commission that we invest in new test equipment.
The Well-Intentioned Brew Head
Almost all filter coffee machines of the classic design have the problem that the brewing water continuously drips onto the same spot in the coffee bed – usually right in the center. At this spot, the coffee powder is strongly agitated with every drip and bubble and extensively extracted by the constant influx of water. Meanwhile, many other coffee particles on the edge of the coffee bed take it easy and watch the extraction party in the center.

It doesn't take much to brew filter coffee well – except for even extraction. That's achieved when as many coffee particles as possible are in contact with water equally intensively and for the same duration. Those who brew by hand practice exactly this technique. Evenly moisten everything and agitate – that makes delicious coffee.
Moccamaster understood the principle and developed a rod-type brew head with 9 holes. This is meant to distribute the brewing water over the coffee bed. Meant to, because at least on our device it doesn't work. The water flows into the brew rod and drips out mostly from the front holes. Ultimately, however, the location where the water exits plays a secondary role, as the water below the brew head combines into a single, connected stream.
We changed the slope of the brew rod to rule out that this might be due to a slanted table or the like, but kept arriving at this result.
The result is that the brewing water extracts primarily in the center and a larger portion of the coffee bed is not evenly wetted. With larger water quantities – that's why the 60g/1000ml brew was better – this plays a minor role because a water bed forms on the coffee powder anyway. But even in this case, extraction is not even.
This malfunction surprised us. The brew head with multiple outlets shows the right principle. However, the distribution of water is not pronounced enough to bring about a significant improvement.

Improving Brews through Agitation
If the brew head doesn't do what it should, then the tricks of hand brewing come into play. Simple stirring of the coffee after about 20 – 30 seconds of brew time leads to significantly better brew results. If you repeat the stirring once the entire water volume has been added, the brew results are noticeably more homogeneous and tastier.
| Grams | mg | Water | Output | Strength | Extraction | Brew time |
| 60 | 12 | 1000 | 885 | 1.36% | 20.06% | 05:10 |
| 60 | 12 | 1000 | 881 | 1.31% | 19.24% | 04:58 |
| 60 | 12 | 1000 | 887 | 1.32% | 19.51% | 05:00 |
| 60 | 12 | 1000 | 884 | 1.35% | 19.89% | 05:02 |
| 60 | 12 | 1000 | 889 | 1.29% | 19.11% | 04:57 |
Table 3
Table 3 also shows a noticeably longer brew time. This occurs because now all the coffee forms a resistance. By stirring at the end of the brew, rotation is deliberately created, which pulls the coffee particles at the edge into a vortex and swirls them through a larger portion of the brew.
Brew Temperature of the Moccamaster
In principle, the brew temperature should be constant. Exceptions confirm the rule. There are coffees that simply taste best when brewed at 80 degrees. In my filter coffee courses, I almost always do the test: participants brew the same coffee at 50, 60, 70, 80, 90, and 100 degrees. There is a clear tendency that the coffee tastes best when brewed at 90 degrees. Again and again, individual coffees also turn out positive at other temperatures. A brew temperature of 92 – 94 degrees is the most popular brew temperature across all brews.

The Moccamaster brews very consistently – but slightly too high in temperature. It reaches temperature incredibly quickly. Already on the first brew of the day, it's ready to brew in less than 20 seconds and the first drops of water drip onto the coffee.
We measured the temperature directly at the water outlet. The first rush of water dripped onto the coffee at a water temperature of 60 degrees. However, this was only a few milliliters, which were probably cooled through heat exchange with the metal brew rod. Subsequently, the Moccamaster brews very precisely and consistently at 98 – 99 degrees at the outlet throughout the entire brew cycle. The impact temperature is hardly lower since the brew head is close to the coffee. In other words: the brew temperature is very high – rather too high for many coffees. These high temperatures tend to intensify the bitterness in coffee.
98 degrees brew temperature is certainly an option for very clear and light-roasted coffees that inherently carry little bitterness and are very transparent. For the vast majority of coffees, however, this temperature is too high. It becomes particularly critical for all coffees that are not specialty coffee and are rather dark roasted. Here, a brew temperature of around 90 degrees or less would be the best choice.
Pulse vs. Continuous Brewing and Pre-brewing
The Moccamaster brews continuously from the first to the last drop. From the start of brewing, water is added in a steady flow. We tested the flow with the interesting scale from Black Mirror. The scale essentially consists of two scales. It measures, on the one hand, the weight of water being added to the filter and, on the other hand, the amount of brewed coffee already in the pot.


Continuous brewing is well suited to deliver uniform results from extraction to extraction. Pulse brews, also called surge brews, add water in pulses. A first pulse is intended as a pre-brew. Only a small amount of water is added. The CO2 created during roasting can escape. CO2 is, on the one hand, not tasty and, on the other hand, its escape creates agitation in the coffee bed. This so-called blooming makes particular sense with darker roasts since they bind significantly more CO2.
Another reason why we recommend using the Moccamaster especially for lighter roasts.
The following chart shows two brews we captured with the Black Mirror app. On the left brewed with the Moccamaster, on the right brewed by hand.
Conclusion and Outlook Moccamaster KBG 741
We thoroughly tested the Moccamaster. The Moccamaster is the third filter coffee machine we're testing in a series of coffee machines. Our background is manual brewing. The author was a Swiss Brewers Cup Champion (filter coffee champion) and multiple vice-champion. The standard for good filter coffee is high – but not so difficult to achieve. As mentioned at the start, only a few basic parameters need to be met.
We engage with automatic filter coffee machines because we expect for the future that, in particular, consistency across many consecutive brews can be better achieved by an automatic machine – while maintaining the same quality.
The Moccamaster is not yet that machine. Compared to hand-brewed filter coffee, the Moccamaster delivers satisfactory to good results with light roasts and poor to satisfactory results with dark roasts.
Its temperature is very consistent – but unfortunately too high. The water distribution is well-intentioned but doesn't work sufficiently in practice. The machine's biggest pro is its very good craftsmanship and 5-year warranty.
These tests were conducted with our test device, which we purchased, like all other test devices.
![]()
















