The Origami Dripper is capable of brewing the best filter coffee. This can be said clearly because filter coffee world champion Carlos Medina from Chile presented the Origami Dripper in his world championship presentation at the World Brewers Cup in 2023. We also appreciate the Origami Dripper and use it repeatedly for the following reasons.
Strengths of the Origami Dripper
The brewer is characterized above all by very high flow during extraction. This means that with the same grind size, the brew flows significantly faster than, for example, with a V60 filter or Chemex. The reasons for this are the large opening at the bottom and the drainage paths that run around the entire filter. When we brew with classic conical 60-degree filter papers V60, the filter only rests on the inner elevations of the Origami waves. This means that the brewing water, with and without extracted coffee, can migrate sideways across much of the surrounding surface. If we compare this to the Chemex, which allows no lateral escape of coffee water because the filter paper lies completely flat, the effect becomes particularly obvious.
The Origami Dripper thus allows for a significantly finer grind size. We can therefore control the extraction speed much more flexibly with the Origami Dripper by adjusting the grind size than with slower brewers, where fine grinds lead to clogging tendencies. This opens up enormous experimental possibilities during brewing.
Bypass - Opportunity and Risk
Bypass is an important factor when brewing with the Origami Dripper. In filter coffee brewing, we call bypass water that does not come into contact with the coffee and thus leads to dilution of the filter coffee solution. This should be particularly considered when choosing the brew ratio. Due to the drainage option, not only does already extracted coffee flow away faster, but freshly added brewing water also tends to avoid the coffee and slide down the sides.
Bypass can be intentionally used with higher doses. An example of a bypass recipe is our Aeopress recipe.
Which coffees are suitable for the Origami Dripper?
We like to brew heavy, processed coffees with the Origami Dripper. These sometimes lack clarity and sharpness in acidity. For this type of coffee, we recommend classic conical 60-degree filter papers that lie flat, such as the Hario V60 filter paper.
For washed coffees, we recommend wave-shaped filter paper with a flat bottom.
Our Origami Recipe
The German and Swiss vice Brewers Cup champion David Wistorf recommends the following recipe with the Origami Dripper for heavy coffees:
- V60 conical filter paper
- 17g coffee to 250 grams brewing water
- 00:00 pour to 50g (preinfusion)
- 00:30 pour to 120g (1st main pour)
- 1:00 pour to 180g (2nd main pour)
- 1:30 pour to 250g (3rd main pour)
- 2:30-3:00 total extraction time
Your Feedback and Your Experiences
How do you brew with the Origami Dripper? Do you have favorite recipes or tips and tricks you'd like to share with the filter coffee community? Then feel free to write them in the comments. Thank you!
Origami Dripper - Where to Buy?
In Switzerland:
In Germany:
In Austria:
















