With the DF64V is a special edition of the DF64 which also came to market in the German-speaking world as G-Iota. The wide variant without V convinced us in many respects in testing and especially impressed us again in the repeat test with SSP burrs. The DF64V follows the original single dosing grinder in many respects, does some things better, and yet in some areas has not learned sufficiently from market feedback. Nevertheless, we're testing yet another good espresso grinder with the DF64, as our video test shows.
We compared 10 single dosing grinders in the price range of 500 to 1000 euros. Read more about it in our article on the subject.
High quality for a good price
The DF64v is a compact espresso grinder that is really narrow at just 11 cm wide. At 20.8 cm in depth and 33.5 cm in height, the grinder is an elegant representative of its kind. The grinder feels very high-quality overall. The exterior is smooth, no sharp edges are noticeable, and the wood elements as a lid and base fit in well. Despite its light weight of only 4.3 kg, the grinder stands solidly on the table.
The DF64V is equipped with a 64 mm burr set. The standard burrs were used in our test. Commercially available alternative burrs from SSP can be used. As our test showed, however, the installed burrs are already capable of achieving a good particle distribution.
At just under 600 euros, the grinder is available in the German-speaking area* making it an interesting choice.
Buy DF64V
The following specialty retailers* carry the DF64V and we can recommend purchasing from these businesses.
Germany: Bohnendealer, Coffee24
Austria: Bohnendealer
Operation and function of the single dosing grinder
The wave of single-dose grinders continues to roll through the home barista corners of the world. The DF64V fits into a series of interesting single dosing grinders. The principle is as simple as it is ingenious. By hand, the amount of coffee is weighed in a dosing cup that will be used for brewing. This coffee is put into the grinder and ground through. The coffee doesn't age in the bean hopper this way and you can switch from one coffee to another.
Like many other single dosing grinders, the DF64 is also slightly tilted forward to help ensure that the coffee grounds grind out completely. The best single dosing grinders achieve this almost without residue. With the DF64V, 0.7 grams remain in the temporary retention. That would be too much for a good single dosing grinder. However, the air blower provides a remedy. With a few strong bursts during grinding, the ground coffee is removed from the temporary retention. If we work here consistently, we achieve a standard deviation of 0.08 grams between shots. A very good value!
In the permanent retention sit 1.6 grams of coffee, which are not replaced from grinding to grinding. But where does the 0.7 grams of grounds get stuck? There is a culprit here. The narrow ground outlet chute of the DF64V. This is not only narrow, but also has a rather substantial declumper. But the combination of declumper, narrow ground outlet and static charge is a combination with the DF64V that leads to problems without deliberate counteraction!

Spray or static
The static charge of the DF64V is so massive that it's hardly possible to get the coffee into the elevated dosing cup. We didn't even use coffees that tend toward strong static. The grinder manufacturers recognized the problem themselves and therefore already send a small spray bottle along. Just a few drops of water change the complete performance of the grinder. Suddenly it grinds smoothly and if the air blower is then used, the retention is reduced to the aforementioned 0.08 grams between shots.
Without spray - we have to say it clearly - the DF64V is in our view actually not usable.
Medium fast, rather loud
The DF64V reaches a volume of 81.6 decibels at maximum RPM and is thus one of the louder grinders. The speed achieved is 19.2 grams of coffee on the espresso setting with our test coffee. The temperature increase is 0.9 degrees Celsius over 6 shots and averages 32.4 degrees Celsius. There is no danger of excessive heat exposure to the coffee here.

Grind setting and recipes
Although a small change to the stepless grind adjustment ring has a large effect on the effective grind setting, we were able to easily switch from espresso to café crème and back over ristretto to the starting grind setting in the test. Both the extraction parameters and the particle distribution were then identical.

Particle distribution DF64V
The particle distribution of the DF64V indicates everything that tastes good to us in espresso in the cup. We have a relatively narrow main peak of only 196 microns. This supports the clarity of the aroma profile and in the case of the DF64V is countered by a rather high fine content of 27%. To a certain degree, a higher fine content is beneficial to the texture and creaminess of the espresso.
The espressos we pulled using the DF64V were clear, had a good body, and could reproduce the expected flavor profile of the coffees used well.
Conclusion on the DF64V
With the help of water spray and pumping, the DF64V is a good grinder, especially in terms of taste. But the home barista has to do something (spray water) and also pump the residue out of the machine. This is not necessary with other single dosing grinders.
We think: for the price, the DF64V could do better here. However, if you're used to the single dosing process anyway, you may not mind that it's not possible without it with the DF64.

Note: The DF64V was designed with adjustable revolutions per minute. We have already tested the performance at fast and slow RPM with other grinders in the past and found better results at high RPM when brewing espresso. That's why slower RPM was not extensively tested in the case of the DF64V. The espressos pulled, however, confirmed our previous experience.
For brewing filter coffee, we recommend reducing the RPM.
* Affiliate link: If you order via this link, it doesn't cost you any more, but we receive a small commission. Thanks for that. We put it toward purchasing more test material.
![]()
















