The Gaggia New Classic is an interesting espresso machine that is very well suited as an introduction to the world of espresso preparation. The small single boiler scores points in terms of construction, is solid, and delivers good results. There is just one thing you need to learn: controlling the temperature to brew perfect espresso.
Larger and more expensive espresso machines, as well as dual boiler espresso machines and especially espresso machines with PID control, are characterized by consistent brewing temperature. With single boilers, you have to make concessions, especially if you want to switch between steaming and pulling espresso.
With a single boiler, both the brewing water and the steam for steaming milk are drawn from one boiler. Hence the name single boiler. However, a different temperature is needed for brewing espresso than for steaming milk.
The perfect espresso brewing temperature is between 92 and 94 degrees. To be able to steam, the temperature in the boiler must be raised to over 120 degrees. Only then is the necessary pressure created. With the Gaggia New Classic, you start heating up by pressing the steam button.
To achieve the perfect brewing temperature after steaming and also to find it when heating up after starting the machine, we have developed a steam-flush-wait rhythm for you, which we present here.
Getting the Gaggia New Classic to the Right Temperature
When you start the Gaggia New Classic, according to the indicator lights, it is ready to operate after just a few minutes. Both the light on the on-off switch and the espresso extraction light are lit. However, the actual brewing temperature is now too hot. So what do you do?
We recommend the following procedure when starting the Gaggia:
- as soon as both mentioned lights are on, you can begin the process
- Press the espresso extraction button and let water run for 10 seconds.
- Hold the portafilter briefly under the hot water so it also reaches the brewing temperature.
- Dry the portafilter well and begin the process of grinding and tamping.
- You have 45 seconds for this. 45 seconds after the initial flush, we measured an appropriate brewing temperature of 92-93 degrees.
- Without this step, we had a brewing temperature of more than 98 degrees and the coffee was correspondingly bitter.
If you want to prepare additional espressos immediately afterwards, we recommend the following procedure:
- Serve the espresso just brewed (approximately 15 seconds)
- Remove the portafilter, flush for 2 seconds via the extraction button.
- Clean the portafilter, grind, etc.
- 45 seconds after flushing, the brewing temperature is right again.
If you brew a cappuccino in between, the procedure should be performed again as at startup. That is, with a flush phase of 10 seconds.
A test of the Gaggia New Classic follows. For now, it was important to us to provide these tips in writing for you. A suitable grinder for the Gaggia New Classic is, for example, the Sage Smart Grind Pro.
![]()
















