Home / Coffee knowledge / Grind settings for our roasted coffees
    Espresso
    Mahlgrad Einstellungen für unsere Röstkaffees

    Grind settings for our roasted coffees

    The espresso cheat sheet is designed to help you dial in our espressos quickly and easily. It also shows how to transition from one coffee to another so you can reach a good result quickly and save coffee.

    Extraction times for our espresso roasts / sweet spot vs. sweet range

    We often talk about a sweet spot in espresso extraction, that is, a point where we enjoy the espresso more. We select green coffees and roast accordingly so that this sweet spot becomes more of a sweet range, a range where the coffee shines.

    General remarks:

    • the darker a coffee, the shorter we extract it on systems that ramp up quickly from 0 to 8-9 bar.
    • the lighter a coffee, the longer we typically extract
    • With espresso machines that have pressure profiling, such as lever machines, the San Remo YOU, or the Decent, we also extract darker roasts longer. Their pressure profiles can be individually tailored to the coffee, and extraction time becomes longer than with an immediate pressure ramp.
    • for more information on how we dial in specialty espressos: see the video
    Grind size final web

    The optimal grind size for our espresso roasts

    Grind size settings are not transferable. Not between different grinders, indeed not even between two identical models from the same manufacturer. The burr settings, the retention figure, and the particle distribution make espresso grinders especially an individual matter.

    However, we can provide general assessments of grind size if we set a reference frame. Far left on our scale is very fine (Mamy), to its right (Toca) is fine, somewhat coarser is the Apas. We recommend grinding the Henrique even coarser than the Apas.

    Especially if you know our coffees or use them as a reference, you can now put them in relation and adjusting the grinder should become even easier.

    Switching grinder settings made easy

    With the above graphic, it should be even easier for you to adjust the grind size when switching between our coffees. We grind the coffees on the left side finer, and those on the right side coarser. The spacing between individual coffees in the graphic is chosen the way we would set it on the grinder.

    Example 1: Switching from Toca to Henrique

    • you have a Toca in the grinder and want to switch to Henrique
    • we wouldn't grind a bit coarser (then you'd be at Dreispitz), but significantly coarser

    Example 2: Switching from Apas to Mamy

    • The Apas is in the grinder and you want to switch to Mamy
    • You orient yourself on the graphic and would grind significantly finer

    Coffee properties and grinder settings

    With the help of the following information, dialing in a coffee will be faster for you. These are general assessments we have documented from our experience.

    Espresso Cheat Sheet

    Drink ratios / brew ratio / matter of taste

    The ratio of coffee grounds used to the amount of coffee beverage in the cup is called the brew ratio—although there is a massive difference here. With filter coffee, brew ratio is understood as the ratio between the amount of roasted coffee dosed and the water poured over the coffee grounds. With espresso, however, we're talking about the ratio between the coffee grounds used and the brew amount in grams in the cup.

    The days of ultra-strong espressos are increasingly past. A good ten years ago, it was common to get highly dosed and under-extracted double espressos in specialty cafés. Too often, these drinks were unbalanced.

    By using a less tight ratio, we increase extraction of the coffee grounds and support espresso balance. By increasing water flow through the grounds, we also raise the extraction rate, which can give the coffee more sweetness.

    Fundamentally, by choosing the right brew ratio, we're making a compromise between texture, balance of sweetness and acidity, and intensity of aroma.

    Tastes are as diverse as the brew ratios chosen.

    Here we have summarized our preferences:

    • lighter roasts we prefer with a larger brew ratio, e.g. 1:2.4 and higher
    • darker roasts we prefer with a smaller brew ratio, e.g. 1:2.2 and higher
    • Robusta roasts like our Mamy we particularly enjoy in a 1:2 ratio
    • especially very floral coffees impress us with longer extractions like 1:2.6 and more

    Further information sources

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy