KM Stainless Steel Steam Wand for DeLonghi Machines

Product Details:

• Precise Steam: Calm, directed steam jet instead of an uncontrolled spray nozzle.
• Better Texturing: Suitable for fine-pored microfoam.
• More Control: Significantly better controllable angle and range of motion when frothing.
• Upgrade instead of New Purchase: Gets more out of existing single boilers without replacing the machine.

Technical Details:

Compatible machines:

• DeLonghi Dedica EC 680
• DeLonghi Dedica EC 685
• DeLonghi Magnifica S ECAM22.110.SB - Fully automatic machine

Other machines with identical connections and steam components may be compatible.

Important Notes:

• The wand improves steam quantity and controllability, but it does not turn a single boiler into a commercial machine.
• For reproducible results, we recommend a suitable milk jug.
• Before frothing, briefly flush to remove condensation from the wand.

Steam Wand Installation Guide

More control. Better microstructure. Finally, proper milk frothing with the Dedica. Installation takes less than 5 minutes – if you know how.

Scope of delivery

• 1× stainless steel steam wand
• 1× transparent sealing ring (for assembly)
• Additional sealing rings as spares

Step 1 – Remove original steam wand

1. Push the original steam wand upwards.
2. Simultaneously turn counter-clockwise.
3. Pull downwards.
4. Completely remove the black rubber outlet.

Step 2 – Insert sealing ring

Place the transparent sealing ring onto the plastic outlet.

The additional sealing rings are only spare parts.

Step 3 – Push on new steam wand

Place the new steam wand straight on and push slightly upwards as you slide it on. Push until it reaches the upper stop.

It must be fully seated at the top.

Step 4 – Secure

Turn clockwise until the plastic pin is fully seated in the corner.

Tighten hand-tight – do not use tools.

Step 5 – Function test

• Turn on the machine
• Briefly draw steam (without milk)
• Check for steam escaping from the side

Care & Our Tip

• Clean immediately with a damp cloth after each use
• Briefly run steam through to blow out milk residue
• Regularly check for a secure fit

Our tip: Before the first milk frothing, let steam run for 5–10 seconds. This stabilizes the steam and ensures a better microstructure.

How do I froth correctly?

Why we sell this steam wand

Many small espresso machines are surprisingly strong on espresso, but significantly lose quality on steam. The original steam wands often produce erratic steam, unreliable vortex formation, and coarse foam.

In our tests, this wand clearly upgraded the Dedica and compatible machines: shorter frothing times, more stable steam, and milk foam that can be poured in a controlled manner. For anyone looking to meaningfully upgrade their existing machine, this steam wand is a logical step before considering a complete machine replacement.