Home / Coffee knowledge / Coffee grinder: Which grinder suits your coffee?
    Kaffeemühle
    Kaffeemühle: Welche Mühle passt zu deinem Kaffee?

    Coffee grinder: Which grinder suits your coffee?

    We have tested, measured, and blind tasted over one hundred coffee grinders. We have not sold electric grinders for three years, which is exactly why we can write about them neutrally. If you are currently looking for a coffee grinder, the first question is not which one is the best. Rather: what do you want to grind with it? Espresso from a portafilter places completely different demands than filter coffee in a hand drip or coarse coffee for a French press. This single decision determines almost everything that comes after.

    Why should you grind coffee fresh?

    A whole bean is a pretty good aroma storage. As soon as it breaks, the surface area increases many times over, volatile aroma compounds escape, and the oils oxidize. How quickly this happens, we saw in our measurements on retention: After just 15 minutes, the volatile components lose noticeably in presence, and after 30 minutes the difference in dark roasted coffees is clearly perceptible sensorially.

    That is the real reason for your own grinder. It is about freshness and the simple fact that pre-ground coffee has already lost much of its aroma before water even touches it.

    Hand grinder or electric coffee grinder?

    This is the first fork in the road, and it is more important than the question of brand.

    A hand grinder is the cheapest way to really good ground coffee. We tested 14 hand grinders under 100 euros against each other, and the good ones among them deliver a quality for filter coffee that costs you many times more with an electric grinder. All manufacturers of high-quality hand grinders rely on stainless steel burrs, not ceramic. Plus: a hand grinder needs no electricity, makes hardly any noise, and fits in a backpack.

    The limit is in the effort. Grinding fine for espresso is work, and if you pull four espressos in the morning, you will feel it in your wrist. When guests come too, hand-crank grinding quickly becomes tedious.

    An electric grinder buys you this effort. In return, it costs more, needs space on the counter, and is louder. For espresso in everyday use, it is still usually the right choice.

    Four hand grinders from our range

    Timemore C5 ESP Pro, approx. 99 euros: the entry point that can also do espresso.

    Timemore Chestnut Slim 3, approx. 129.90 euros: sleek design, grinds from espresso to filter.

    Comandante C40 MK4 Nitro Blade, approx. 222 euros: the reference from German manufacturing.

    Kinu M47 Classic, approx. 348 euros: hard to beat in terms of clarity and complexity.

    You can find all hand grinders in the shop here.

    David Wistorf, German and Swiss Vice-Champion Brewers Cup

    "I used the Kinu at my last three Brewers Cup championships because the sweetness and mouthfeel are outstanding."

    Which coffee grinder do you need for which brewing method?

    This is where it becomes clear how much you need to spend. The requirements differ more than most people expect.

    Filter coffee, hand drip, and Chemex

    The grind is about coarse sand. What is important is not fineness, but uniformity: you want as few very fine particles as possible, because they over-extract and become bitter, while the coarse ones are not done yet. A good hand grinder is completely sufficient here.

    French Press

    As coarse as sea salt, and thus the most undemanding method of all. Almost any decent grinder can do that. If you only drink French press, you don't need an expensive grinder. A good grinder will help you make the coffee tastier, of course.

    Espresso and portafilter

    Between powdered sugar and fine sand, and that is the most demanding discipline. You need a fine, well-resolving grind adjustment here, because a few hundredths of a millimeter decide between sour and bitter. This is precisely where cheap and good grinders part ways.

    We tasted 30 espresso grinders ranging from 80 to 2,200 euros against each other. Which one won in which price bracket is in the big grinder test.

    Automatic espresso machine

    With an automatic machine, the grinder is built in. So you don't buy a separate one; instead, you choose a grinding mechanism along with the machine. How that compares to the portafilter, we have written in the comparison of portafilter or automatic espresso machine.

    One grinder for everything?

    It works, but costs convenience. Shop grinders can grind everything from espresso to filter, but are more complicated to handle than a specialized grinder. If you do both seriously, you are often better off with an electric grinder for espresso and a hand grinder for filter.

    What types of grinding mechanisms are there in coffee grinders?

    Flat grinding discs and conical grinding mechanism in direct comparison

    Flat grinding discs on the left side, conical grinding mechanism of the Baratza Sette 270wi on the right.

    Blade grinder: not really a grinder

    Devices with rotating blades chop the bean, they don't grind it. The result is a mix of dust and coarse chunks, and there is no defined grind size. For coffee where taste matters, that is not an option.

    Conical burr

    A central cone with milled teeth faces a rotating ring with similar tooth pattern, usually the cone rotates. Grinding gap and tooth depth determine the grind size. In this geometry, a relatively imprecise particle size distribution develops because the bean or its fragment only travels a limited distance. Conical burrs need more powerful motors, allowing lower speeds in return.

    Conical grinding mechanism of the Mazzer Robur

    Conical grinding mechanism of the Mazzer Robur.

    The higher fine fraction is not automatically bad. It works well with dark roasts and short extraction. With lighter roasts, however, the distribution becomes unclean.

    Disc grinding mechanism

    Two very similar or identical rings, one stationary, one rotating. The beans fall in centrally and are driven outward by centripetal force into the grinding gap. The discs can sit horizontally or vertically; in the latter case, a feed screw is needed. The result is a more discrete distribution, especially with larger disc diameters and powerful motors with constant torque.

    Steel or ceramic?

    Most grinding discs are milled from steel blanks. Alloy and coating, often titanium oxides or titanium nitrides, determine hardness, coefficient of friction, thermal conductivity, and durability, and they have an influence on the aroma that should not be underestimated. To quantify this scientifically cleanly, however, more research is needed than currently exists.

    For hand grinders it is clearer: all manufacturers of high-quality hand grinders rely on stainless steel. You find ceramic grinding mechanisms almost only in the cheap segment.

    How do you recognize a good coffee grinder?

    Four things, and none of them are on the box.

    Particle size distribution

    When a grinder breaks down beans, it never creates a single particle size, but a whole spectrum. We measure this by dynamic image analysis with a Retsch Camsizer X2 and have now measured over 100 grinders. Three values count: the median x50, which for espresso typically lies between 200 and 300 micrometers, the fine fraction below 100 micrometers, and the width of the main peak.

    Particle distribution of six espresso grinders in comparison

    Particle distribution of six espresso grinders in comparison.

    Why this matters: coffee is extracted at the interface between water and particle. The more surface area, the more extraction. With a broad distribution, the fine particles are already over-extracted while the coarse ones have released nothing. That tastes chaotic, somewhere between acidic and bitter. A homogeneous distribution gives a clear, harmonious espresso.

    Retention

    Retention is the coffee that gets stuck in the grinder and comes out with the next grinding. Old, oxidized, and it lands in your cup. The differences are large: the Niche Zero is at 1.1 grams, G-Iota and Zuriga G2 each at 1.5 grams, the Rommelsbacher EKM300 also at 1.5 grams. The Eureka Mignon Magnifico comes to 2.1 grams, the Baratza Sette 270 to 2.7 grams. Some models are over 10 grams.

    We also distinguish between temporary retention, permanent retention, and the sum of both, the absolute retention. The temporary retention fills with each grinding and releases the "old" stored coffee. The permanent retention gets sticky and fills permanently and does not get exchanged with each grinding.

    Grind adjustment

    Not how many steps there are, but how finely they resolve. Shop grinders often grind very well, but have too coarse an adjustment to hit espresso precisely. With hand grinders you count in clicks; with electric grinders the question is whether the scale is stepless or stepped. When making espresso, we clearly notice the effect when the scale does not resolve finely. If we adjust the grind by one step and the extraction time jumps by several seconds, precise tuning of the target recipe is barely possible. Poor grinders jump more than five seconds per step here.

    Motor, speed, and heat

    With very hard beans, i.e., light roasts with high density, it can happen that the motor cannot muster the necessary torque and the grinder jams. When grinding, heat inevitably develops. A 2016 Nature study explained why shots run faster throughout the day: roasted coffee is in a glassy state, a pseudo-solid, that breaks apart differently when heated. This changes the particle distribution and thus the extraction.

    At fine grind sizes, medium speed gives a better cup in our experience than high speed. At coarse grind sizes, the rule is more: the faster through, the better, because slow grinding works the particles longer and the cumulative energy input harms the coffee.

    How do you adjust the grind?

    The quickest orientation is visual and tactile: French press is coarse sea salt, filter coffee is fine sand, espresso is somewhere between powdered sugar and fine sand.

    For espresso there is a reliable rule. Take 18 grams of coffee, aim for 36 grams of espresso in the cup, and time it. Between 25 and 30 seconds is the window. If the shot runs through in under 20 seconds, the grind is too coarse and the espresso tastes sour and thin. If it takes over 35 seconds, it is too fine and becomes bitter.

    18 gCoffee in the basket
    36 gEspresso in the cup
    25–30 sExtraction time
    Our tip

    Adjust in small steps and discard 2 to 6 grams of grounds after each change, otherwise the retention will mix the old grind into your next extraction.

    What does a good coffee grinder cost?

    For filter coffee you will be happy with a hand grinder from about 100 euros, and for the long term. For espresso by hand you should expect more like 250 euros upward, because the grind adjustment needs to resolve more finely. But there are a few exceptions. After a long search, we have added hand grinders to the shop that grind espresso-fine and filter-clear in every price category.

    With electric espresso grinders, our test field ranges from 80 to 3000 euros, and the quality jumps are not where you would expect them. The category winner in the 150 to 250 euro range was the Sage Smart Grinder Pro in 2023. Meanwhile, there are single dosing grinders like the Eureka Mignon Manuale, the DF54, Emil Em1, or the Varia VS3 that have overtaken the Smart Grinder Pro in terms of quality.

    One more thing, because it is so often done wrong: if you make espresso and have a fixed budget, shift it in favor of the grinder. Simple household grinders cannot match semi-professional grinders, and the result in the cup disappoints regardless of how good the machine is.

    Single dosing, bean hopper, or grind by weight?

    If you have landed on electric grinders, you will encounter these three terms. Briefly sorted:

    Various types of coffee grinders at a glance

    Coffee grinder types at a glance.

    1
    Bean hopper with timer. You fill in beans, the grinder grinds for a set time. Fastest workflow, but the coffee sits in the hopper.
    2
    Single dosing. No hopper, you weigh each portion individually. The coffee stays fresh, you can switch between varieties, and cleaning is simpler. In return, each extraction takes longer because you have to weigh first. Almost all professionals work this way at home today.
    3
    Grind by weight. Instead of a timer, a load cell controls. You set grams and get grams, independent of grind size and bean density. Among the seven grinders in our comparison, retention ranged from 1.5 to 7.1 grams.

    Which category fits you depends less on the technology than on your everyday life. We went through that in a separate article.

    How do you clean your coffee grinder?

    The oil from the beans settles in the bean hopper and becomes rancid over time. At home, it is enough to vacuum the empty grinder from both sides every two weeks and suck it out and run cleaning granules through it. In a café it should happen twice a week.

    Opening the grinding chamber itself is another matter. Modern grinders are designed to be opened and cleaned easily. In our tests, we also evaluate how easy it is to clean by opening. Especially grinders with large retention must be cleaned more often down to the last crack.

    Warning

    Never reach into the powder outlet with pointed objects, there is often a sensitive silicone membrane there.

    Frequently asked questions about coffee grinders

    Is a hand grinder worth it for espresso?

    Yes, if you make one or two espressos a day. From three to four it becomes work, and then an electric grinder pays off for the convenience. Unless you like the daily workout.

    Conical burr or disc grinding mechanism, what is better?

    Neither one blanket statement. Conical burrs create more fine fraction, which works well with dark roasts and short extractions. Disc grinders deliver a cleaner distribution, especially with large diameter. The implementation in the specific device matters more than the principle.

    How fine must coffee be ground for filter coffee?

    About like fine sand. Coarser than espresso, significantly finer than French press.

    Can I grind filter coffee with an espresso grinder?

    Often only limited. A pure espresso grinder does not cleanly cover the coarser range for filter coffee. Conversely, a filter grinder usually cannot handle the fine espresso range. However, there are also all-purpose grinders with narrow main peaks that grind well along the entire coffee range, such as the Eureka Libra 65 AP. Other grinders solve this with flexible burrs that can be changed. As a rule: if a grinder has a narrower main peak in the particle distribution, it is better suited for filter coffee.

    How often should I clean the coffee grinder?

    At home every two weeks, in a café twice a week.

    Do you sell coffee grinders?

    Hand grinders yes, electric grinders no. We stopped selling electric grinders three years ago so we can test them independently.

    Before you order

    We have all personally used our hand grinders for months in everyday use before they came into our range. And without a scale there is no reproducible grind.

    Summary

    If you make filter coffee or French press, a good hand grinder from about 100 euros is enough, and you will be satisfied with it for years.

    If you make espresso, the grinder is the more important part of the purchase. Shift your budget there, not into the machine.

    Pay attention to the resolution of the grind adjustment and to the retention, not to the number of steps or the wattage.

    And whatever grinder you choose: grind shortly before brewing, not in advance.

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy