A double espresso, 120 grams of creamy frothed milk, a 160 ml cup – that's a Flat White. Sounds simple. It's not. What sets this drink apart is precisely the ratio: more espresso, less milk than a cappuccino, and a milk foam that doesn't sit on top but integrates into the drink. We explain what makes a true Flat White, how it came about, how it differs from a cappuccino, and how to make it at home.
Espresso base: Double espresso or double ristretto · approx. 30–42 ml
Milk amount: approx. 100–140 g (ours: 120 g)
Cup size: 150–220 ml (depending on café and country; ours: 160 ml)
Milk foam: Microfoam, creamy, maximum 0.5 cm thick
Special feature: Higher espresso content than cappuccino, no thick foam cap
What makes a Flat White a Flat White?
The name says a lot. "Flat" means flat. The milk foam sits flush with the cup rim, it doesn't dome up like a classic cappuccino. "White" stands for the milk that lightens the espresso. What sounds like a simple stylistic term is actually a philosophy: the Flat White should give espresso room to shine. The milk complements it, it doesn't mask it.
In our cafés, we interpret the Flat White like this: a double espresso shot, 120 g of organic milk (regional, 3.5% fat), a 160 ml cup. The cup size is no accident: it's chosen so the Flat White reaches exactly to the rim. No room for foam mountains. For comparison: for a cappuccino in the same cup, we use just a single espresso shot and about 140 g of milk. The espresso takes much more of a back seat here. With a Flat White, it's the opposite: the espresso comes through.
You can taste the difference. The fine aromas of the bean – fruitiness, acidity, sweetness – are much more prominent than in a cappuccino. If you like good espresso, you'll love the Flat White. If you hate espresso, you should order a latte macchiato instead.
Where does the Flat White come from?
Honest answer: Nobody knows for sure, and anyone claiming they do is bending the truth a bit. Australia and New Zealand have been arguing about the invention for decades, and both countries have good arguments.
What's clear: the Flat White emerged in the 1980s in the context of espresso culture that developed in the major cities of Australia and New Zealand. Many Europeans – especially British and Italian people – had emigrated to Oceania after World War II and brought their coffee habits with them. In cities like Sydney and Melbourne, cafés with real group head machines and trained baristas began appearing in the 1980s, long before that became standard in Germany.
The most commonly told story: a barista serves a guest who ordered a cappuccino a poorly frothed coffee – the foam was too thin, the milk hadn't built up enough. Instead of apologizing, he says: "Sorry, it's a flat white." Whether that happened in Sydney or Wellington, in 1985 or 1989, whether the barista was named Derek Townsend or someone else entirely – depending on who you ask, the story changes.
What happened next is clearer: the Flat White migrated from Oceania to Great Britain, then to Europe. In the 2000s, it appeared in more and more cafés, and once Starbucks added it to its global menu in 2015, even the last skeptics were convinced. Today it's a staple of any serious coffee menu.
Whether Australia or New Zealand, that's irrelevant for the cup in front of you. What matters more: the Flat White has a craftsmanship philosophy behind it that caught on. More espresso, less foam, more coffee flavor. That was new, and that's what makes it good even today.
Flat White, cappuccino, latte – what's the difference?
These three drinks confuse many people because at first glance they look similar. All three consist of espresso and milk. But the ratios and foam consistency differ significantly – and you can taste it.
| Drink | Espresso base | Milk amount | Foam thickness | Cup size | Espresso content |
|---|---|---|---|---|---|
| Flat White | Double espresso | approx. 100–130 g | Microfoam, <0.5 cm | 150–180 ml | High |
| Cappuccino | Single espresso | approx. 100–140 g | 1–2 cm foam | 150–180 ml | Medium |
| Latte macchiato | Single espresso | approx. 200–250 ml | Little | 300–400 ml | Low |
| Cortado | Double espresso | approx. 30–40 g | Barely any foam | 80–100 ml | Very high |
* Our interpretations from café everyday life. Variations depending on café and interpretation are normal.
Flat White vs. Cappuccino
That's the comparison most people are interested in. In our cafés, we use the same 160 ml cup for both. The difference: with a cappuccino it's a single espresso shot, with a Flat White it's a double. That means: in the cappuccino, the espresso is more in the background. With a Flat White, it defines the drink. If you want a milder, milkier cup, order a cappuccino. If you want to taste the coffee, choose Flat White.
Another difference: a cappuccino classically has a firmer foam cap. With a Flat White, we froth less and create a microfoam that's so fine and creamy it blends seamlessly with the milk and doesn't form a noticeable foam layer.
Flat White vs. Latte Macchiato
The difference is more dramatic here. A latte macchiato is a large drink – 200 to 400 ml, lots of milk, a single espresso. The coffee flavor is subtle to barely noticeable. The Flat White is smaller, more concentrated, more intense. If you want a strong coffee flavor in the morning, a Flat White is the better choice.
The Flat White recipe – step by step
The espresso base: double espresso or ristretto?
A question that sparks debate in the coffee community: some baristas – especially in Australia and Britain – swear by ristretto as the base. A double ristretto is ground with the same amount of coffee as a regular espresso but pulled with less water: about 15–20 ml instead of 30–40 ml. The result is a more concentrated, sweeter shot, ideal with darker roasts where the shorter pull smooths out bitter notes.
A second approach, which more and more cafés are consciously choosing: pulling a double espresso at 1:2 – for example, 17 g of coffee grounds yielding only 34 g of espresso instead of the usual 40–42 g at 1:2.5. That's between ristretto and standard espresso: more volume than a ristretto, but more concentrated than the classic 1:2.5 shot. This approach makes sense especially when using a slightly larger cup while still maintaining coffee intensity.
In our cafés, we use a double espresso at 1:2.5 – that is, 17 g yielding 40–42 g in the cup, with a flow time of 25–30 seconds. That works well with our light, fruity beans, where the fruitiness comes through nicely even in the standard shot. Feel free to try all three variations: ristretto, 1:2, and 1:2.5. The differences are quite noticeable, and which works best depends on the bean, the roast, and your cup size.
On grind size: if the espresso runs through too quickly, it's underextracted and sour – then adjust the grind finer. Too slowly, too bitter – set it coarser.
For the Flat White, we recommend our fruity, light-roasted beans from our purple or orange line. The floral, slightly fruity note blends harmoniously into the drink with the reduced milk amount. No intrusive coffee flavor, no overwhelming intensity. Our APAS organic espresso is also excellent. Dark-roasted beans work, but then the Flat White quickly feels heavy.
How big is a Flat White? Cup size in international comparison
The 160 ml we use sits at the traditional-artisanal end of the spectrum – and that's where it belongs. In Australia and New Zealand, where the Flat White originated, 160–175 ml is considered standard. Many European specialty cafés that adopted the drink from there have since moved to 180–200 ml. With a slightly larger cup, the Flat White becomes more accessible without losing its character, as long as the espresso shot and milk amount are adjusted accordingly.
Starbucks serves its Flat White in 354 ml. That's a different category. It's called a Flat White but follows different logic: more milk, more volume, broader appeal. That's not a measure for the drink's original idea and shouldn't be.
Why we stick with 160 ml: it's the most direct realization of the drink's original idea. The espresso defines the beverage. In a 200 ml cup with the same amount, you quickly drift toward latte territory. The 160 ml cup makes the ratio clear. If the drink seems too small at first, try it anyway. Most people are convinced after the first sip.
Frothing milk: drawing and rolling phase
This is where most people fail – not because it's so hard, but because you need to understand the logic. The goal is microfoam: milk so creamy it's like melted vanilla ice cream. No firm foam, no visible bubbles.

That happens in two phases:
Drawing phase: Fill the pitcher about one-third to halfway with cold milk. Briefly blow out the steam wand (the condensation inside shouldn't go into the milk). Then hold the wand tip just below the milk surface and turn on steam. The milk draws in air and increases in volume. You'll hear a soft hissing – that's correct. Once enough air is in (the pitcher has visibly grown in volume), switch phases.
Rolling phase: Now submerge the wand a bit deeper and position it so a rolling circular motion develops in the milk. The large bubbles from the drawing phase are destroyed and the air is worked in homogeneously. Keep steaming until the pitcher is so hot you can barely hold it – that's about 65 °C. After that, blow out the wand and wipe immediately.
The result should be creamy and smooth. No individually visible bubbles. If you gently shake the pitcher, the milk should flow like thick cream.
Assembling and pouring
The espresso goes in the cup first. Then add the frothed milk, evenly, with a small circular motion so the milk and espresso blend well. If you want to do latte art, start that while pouring. It takes practice, but the right milk consistency is essential. Latte art works with microfoam, not with firm foam.
You can find our tutorial on frothing and pouring latte art here.
Flat White with oat milk – does that work?
Yes. But not every oat milk is suitable.
The problem is protein structure. Regular oat milk froths poorly and tends to curdle when it contacts hot, acidic espresso. Barista oat milk has a higher fat content and is specially formulated to froth and stay stable. Brands like Oatly Barista, Alpro Barista, or Minor Figures work well.
The preparation barely changes: oat milk froths best at a slightly lower temperature than cow's milk – about 55–60 °C instead of 65 °C. Frothing too hot makes oat milk watery. The flavor in the Flat White is milder and sweeter than with cow's milk, which harmonizes very well with fruity beans.
For those looking at vegan alternatives: barista soy milk and almond milk are also possible, the latter with less volume and thinner consistency.
More details on different plant-based milk varieties and which work best for frothing can be found in our comprehensive barista oat milk comparison.
What equipment do you need for the Flat White at home?
The Flat White doesn't forgive mistakes in the espresso base – the espresso content is too high. That means: you need equipment that lets you produce consistently good espresso.
Group head machine: You need a machine that delivers stable brewing temperature and 9 bar brewing pressure and has a steam wand for frothing milk. The DeLonghi Dedica is a good entry point (from about 200 euros). You can find all our tested espresso machines here.
Espresso grinder: This is the most important piece of equipment. Without a decent grinder that you can fine-tune and that grinds evenly, you won't get consistent, good espresso. Hand grinders for espresso are possible but demanding in everyday use. Here are our grinder tests.
Scale: For the brewing recipe (17 g coffee grounds → 40–42 g espresso), you need a scale that measures to 0.1 g accuracy. When pouring milk, it helps measure out 120 g precisely.
Milk pitcher: We recommend frothing and pouring with two pitchers. The larger pitcher is used for frothing initially. Some firmer foam is poured into a smaller pitcher. Many pour latte art with the larger pitcher. Our barista professionals have developed two pitchers with different pouring characteristics, each optimized for different patterns and techniques.
Flat White without a group head machine – is that possible?
With limitations. You absolutely need a steam wand or milk frother that can produce microfoam. Nanofoamers or similar electric frothers come closest if no group head machine is available.
As an espresso base without a group head machine: a Moka pot (not true espresso, but acceptable), an Aeropress with finer settings, or a capsule machine with Nespresso compatibility. The result isn't the same as with a group head machine, but it's fine for starting out.
Common mistakes with Flat White
Espresso too sour: Underextraction. The grind is too coarse, the espresso runs through too quickly. Adjust the grinder finer.
Espresso too bitter: Overextraction. The grind is too fine, the espresso runs too slowly. Adjust the grinder coarser.
Milk frothed too hot: Above 70 °C, milk loses its natural sweetness. You'll notice. Target: 60–65 °C.
Too much air in the drawing phase: The Flat White then gets a thick foam layer instead of creamy microfoam. Draw shorter, switch to rolling phase earlier.
Too dark beans: With very dark roasts, the Flat White becomes intense and bitter. Light, fruitier roasts are worth it for this drink. They blend harmoniously with the reduced milk amount instead of overwhelming the drink.
Wrong cup size: In a 250 ml cup, a Flat White becomes too thin and cold. Use a 160 ml cup. The ratio then works automatically.
Flat White – frequently asked questions
What is a Flat White?
A Flat White is an espresso-based milk drink made from a double espresso and about 100–130 g of creamy frothed milk. The cup holds 150–220 ml depending on the café, though 160–180 ml comes closest to the artisanal original from Australia and New Zealand. The milk foam is fine and creamy (microfoam) and sits flush with the cup rim, hence the name. Compared to a cappuccino, the Flat White has a higher espresso content and less foam.
What's the difference between Flat White and cappuccino?
In a cup of the same size: the Flat White has a double espresso shot, the cappuccino usually a single one. The cappuccino has more milk, thicker and firmer foam. The Flat White tastes more intensely of coffee because of this. Our cappuccino in the same 160 ml cup has about 140 g milk and a single shot, the Flat White has 120 g milk and a double shot.
How much milk does a Flat White have?
Approx. 100–130 g, depending on the café and cup size. In our cafés it's 120 g in a 160 ml cup. Combined with the espresso (approx. 40 ml), that fills the cup exactly.
How many calories does a Flat White have?
With whole milk (3.5% fat): approx. 80–90 kcal per cup (120 g milk + double espresso). With barista oat milk: approx. 60–75 kcal. These values vary depending on milk amount and fat content. With oat milk, calorie content is somewhat lower, but carbohydrate content is higher than with cow's milk.
How much caffeine does a Flat White have?
A double espresso contains approximately 100–140 mg of caffeine depending on the bean and roast. That's more than in a cappuccino with a single shot (approx. 60–80 mg) and significantly more than in a latte macchiato. If you tolerate caffeine and want an intense coffee, a Flat White is a good choice.
Can you drink a Flat White cold?
As an iced Flat White: yes. For that, pour the espresso over ice cubes and add cold milk. No frothing needed. The ratio stays similar: more espresso, less milk. In summer, that's a solid option.
Conclusion
The Flat White isn't a trend that's passed, it's a delicious drink with a clear concept. Once you've tasted a proper one, you understand why: the espresso comes through, the milk makes the mouthfeel rounder, and there's no foam mountain in between.
If you want to make it at home, it's worth investing in a decent grinder more than in a pricier machine. The rest – frothing milk, adjusting the recipe, finding the right grind – you learn with a little patience.
And if you'd rather learn that in person: in our coffee courses, we practice exactly that. Setting espresso, frothing milk, latte art – with our barista Kaffeemacher directly involved.
















