Grinding coffee by weight makes setting up any espresso machine easier. That's exactly what the Mazzer Mini G is for: it delivers the amount you've set — even when you've adjusted the grind setting. This helps both beginners and professionals. The grind-by-weight grinder with 64 mm burrs costs around 1,200 euros.
That raises the question of what else the grinder can do. How does the particle distribution look? How does the espresso taste? And does it have retention? We can tell you upfront: it does. And the amount is the most unpleasant number in this test.
To compare all grind-by-weight grinders for home use, click here.
Build Quality: Hard to Beat in This Price Range
The Mini G is unmistakably a Mazzer. Michel puts it perfectly: "In this price segment, it's the most solidly built and longest-lasting device out there." If you buy a Mazzer, you'll probably still be using it in 30 years, even if you have to replace the burrs over the years — they typically last about ten years depending on throughput.
There's one downside in the portafilter holder. You can fine-tune it in height and depth, and every portafilter we tried fits. But adjusting it requires Phillips, hex sockets, external hex keys, and a wrench — quite a collection of tools for a grinder that's otherwise so cleanly built.
The Discharge is the Benchmark
The best thing about the Mini G happens in the seconds when the ground coffee falls into the basket. A fine, powdery stream, evenly distributed, a clean pile in the basket. You can skip WDT or other distribution tools entirely. The ground coffee is fluffy and very well distributed and fits easily into the basket despite the fluffiness: it dropped effortlessly into our Kaffeemacher basket with 18.5 grams. If anything spills, you can easily adjust the portafilter holder position.
Important: fluffiness is not the same as particle distribution. More on that in a moment.
21.2 Grams in 10 Seconds, 84.9 dB
With a full bean hopper, the Mini G dispenses 21.2 grams in 10 seconds; for 18 grams it needs 9.5 seconds. This isn't blazingly fast, but it's on the speedy side and very pleasant for daily use.
During continuous operation we measure 84.9 dB. It's certainly not the quietest grinder. But the number alone doesn't tell the whole story. The noise is pleasant, not combat-mode, but rather a powerful, elegant motor that grinds through the coffee quickly.
Thermally the grinder stays relaxed. Beans go in at 22.6 °C, the first sample comes out at 27.9 °C, after five consecutive grindings with 20-second breaks we're at 29.9 °C. Average 28.5 °C. The burrs don't heat up, even with multiple shots in succession.
Consistency and Grind by Weight: It's Honest
The Mini G doesn't show you what you've set, but what actually came out. With grind-by-weight grinders, this is not a given: you see where you really stand.
Over five 18-gram grindings we measure 17.8 / 17.9 / 17.8 / 17.7 / 18.0 grams. The mean deviation is 0.1 grams, the standard deviation is 0.11 grams. Solid. For a grinder that's supposed to weigh to the gram, we would have preferred 0.1 grams as the maximum. Outliers down to 17.7 grams are quite a lot for a GbW grinder.
When the grinder doesn't reach the target weight, it grinds a bit more. In principle that's correct, because in the end you get the right dose in the portafilter. Michel sees a catch here anyway: every motor has a startup phase, and a slightly different particle image forms during that startup phase. But with 0.2 to 0.3 grams of additional grind, that won't change extraction.

Retention: 11.8 Grams — and That's the Problem for Home Use
Looking at espresso at home, the Mazzer Mini G has a major downside. The retention of the Mini G is 11.8 grams absolute. We measure 10.6 grams temporary and 1.2 grams permanent. This value puts it on the negative podium among grinders meant for home use.
To be fair upfront: most of it is temporary, so it swaps out with every grind. Very little gets permanently stuck. The 1.2 grams permanent is unremarkable for a hopper grinder.
Still: 10.6 grams of temporary retention means that in your portafilter you always get more than half a shot of coffee that's one grind older. And if you adjust the grind setting, you first have to grind out these nearly 11 grams before you see the new setting in your extraction. That's frustrating in everyday use and expensive when dialing in a new bean.
Dear Mazzer team: the grinder is fun to use and we enjoy working with it. But 11.8 grams is too much for home. Make the grinding chamber smaller or flatter.
For single dosing the Mini G is not an option, and that's not its goal anyway. That's what the sister model is for, the Mazzer Philos.
We empty the bean hoppers of our grinders in the evening. Then you dial in once in the morning, and the retention hardly matters over the day. That's exactly the rhythm where the Mini G feels most at home.

Setting the Grind: One Mark is Four to Five Seconds
The grind adjustment is typical for Mazzer: you adjust the entire upper part of the grinder via a fine thread. This is much more pleasant than the old models, where you had to apply so much force when adjusting that it was hard to hit the grind setting precisely.
One mark on the scale corresponds to roughly four to five seconds of extraction time. In our test block we landed either at 23, 24, or 25 seconds or right away at 30 to 32. Intermediate positions are possible if you adjust gently enough. But then you have to grind out those roughly 11 grams again before you see the result. Finding the grind setting with this grinder demands a good deal of finesse, patience, and a willingness to waste coffee due to the high retention.
A tip for cleaning: when you take the grinder apart, thoroughly clean the fine thread with a brush before screwing it back together. Otherwise you'll struggle to screw it back on.
Replicability: The Main Peak Returns, the Fines Don't
For the adjustment test we go from espresso (T4, grind setting 7.4) to ristretto (T5, 7.2), then to café crème (T6, 7.8) and optically back to the original mark (T7).
The main peak returns cleanly: 217.7 µm at T4, 220.6 µm at T7. But the x50 value drops from 238.9 to 191.8 µm — a good 47 µm deviation. The reason is in the fines: the fines peak shifts from 32.1 to 40.1 µm and is noticeably higher in the curve at T7 than at T4. So coarse is coarse again, but more fines come along. In the cup this shows in extraction time: instead of the set 25 seconds, at T7 we land between 23 and 27 seconds.
Practical consequence: simply turning back optically to the old mark is not enough. If you switch between recipes, it's best to dial in with the scale and the timer.
Particle Distribution: Main Peak at 217.7 µm — Good for Many Coffees
We measure particle distribution in cooperation with the Coffee Excellence Center of ZHAW on the Retsch Camsizer X2.
In the espresso setting (T4) the main peak is at 217.7 µm, the x50 is at 238.9 µm, the fines peak is at 32.1 µm. For comparison: ristretto (T5) comes to 196.0 µm x50, café crème (T6) to 275.5 µm.
The 220 range for the main peak is a good place for many coffees. With dark and medium roasts you get a bit more clarity without losing body and texture. And with fruity coffees there's definitely a certain clarity, but the body and texture layer remains intact. The grinder combines the best of two worlds: light coffees perform well, with minimal compromise in clarity, dark and bold roasts as well.
The Mazzer burrs 233M in 64 mm format are installed. Mazzer sets standards in burr technology; that's one of the company's strengths. Besides the 233 burrs, the k202 were tested, which impressed especially with their sweetness and clarity.

Operation, Display and App
Here Mazzer took an odd turn. To change the dose, you go into the menu, then to the cup, then to the safety setting, then to dose 1, adjust and save. Before you just held button 1 for a long time and you were done. The display is just a display, not a touchscreen. Plus there are oddities in the English translation: inconsistent capitalization. If you switch from the dosing cup to the portafilter without recalibrating, the grinder tells you that you have "overweight." Michel took that a bit personally.
You should calibrate anyway. The calibration weight is included and is also the basis for the magnetic dosing cup. After every switch between cup and portafilter, do it again. That's part of the consistency.
Then there's the app, and as so often with apps, we philosophize about its added value. If a grinder has such a detailed menu system and a large enough display, it doesn't need a second control level on your phone — except perhaps for a later connection to a machine or scale. At least the translation errors could be fixed via the interface. We tested firmware 2.1.00008.
By the way: unlike the Mahlkönig E64 WS, the Mazzer Mini G has no portafilter detection.

Apas Decaf, Decaffeinated Espresso from Brazil
The coffee from this test: sweet and cocoa-like, notes of malt, marzipan and dark chocolate, with a fine acidity. The reason we can still experiment in the evening.
In the Cup
We tasted using our reference coffee, the Apas Espresso from the APAS cooperative from Brazil — in the video in the decaffeinated version. Sweet, cocoa-like, some malt, marzipan and dark chocolate. The nuttiness remains, plus a fine, subtle acidity. Dense on the palate. This matches the measurement: the Mini G builds body and texture, and a certain clarity remains. For classic, more traditional roasts that's exactly right, but light coffees also do well with it.
Conclusion
The Mazzer Mini G is excellently built, grinds beautifully into the basket, and grinds espresso that tastes good to us in all directions of the spectrum. We tried light and dark roasts and had a lot of fun drinking a really good decaffeinated coffee with the Apas Decaf.
Let's put it this way: when the grinder is dialed in and we've made several shots in a row, it convinces on all fronts. But the path to dial it in and the breaks in between have significantly impaired the workflow. That's where the 11.8 grams of retention becomes a problem — when you haven't made coffee for a while or when you're dialing in. Because it means you have to grind out those roughly 12 grams every time before you see the effect of the new grind setting in the extraction.
Strengths: Build quality and longevity are hard to beat in this price range. The discharge into the basket is fluffy and homogenous — you can skip a WDT tool.
What's really cool: the Mazzer delivers "honest" grind by weight and shows what actually came out. If it only grinds 17.7 grams, the grinder admits it, and you can add more.
Thermally the grinder is unremarkable at 29.9 °C after five grindings. Despite 84.9 dB, the grinding noise is pleasant in tone quality.
Weaknesses: 11.8 grams of retention. Stiff grind adjustment where one mark equals four to five seconds. Unintuitive menu system, an app without clear added value, with translation errors. And simply turning back optically isn't enough: 47 µm x50 deviation between T4 and T7.
For whom? For small commercial settings. Got an office with twenty people and a single-group volumetric portafilter machine? Then the Mazzer Mini G is perfect for you. Want to run a food festival booth where coffee is on the side? Or looking for a second grinder for café crème or decaf with 30 to 40 shots a day for a small café? These are use cases where the Mini G will shine, as will a large shared apartment.
The Mini G from Mazzer will convince where you dial in once in the morning and then keep going. Then the retention hardly matters and the robustness shows its full strength.
Not for whom? For anyone who pulls two to four espressos a day at home. If you have to grind out roughly 11 grams after every adjustment, you lose exactly the comfort that grind by weight was supposed to bring. For single dosing, the grinder is the wrong choice anyway. In our large espresso grinder test you'll find more suitable candidates for home use.
Value for money: At around 1,200 euros you get build quality at commercial level, a grinding image that falls into the portafilter like few others, and a working scale. What you don't get: contemporary operation and contemporary retention. We've known the grind adjustment in this form since 2007 from our old Mazzer Roburs. We would have liked the development work to have gone there instead of into an app.
Test Results: Mazzer Mini G
Evaluation according to the KM Test Protocol for Espresso Grinders. All measurements taken by us. Single-dosing performance corresponds to temporary retention because that's exactly the amount left in the chamber after grinding. Particle distribution intentionally does not factor into the color rating because it is roast-dependent.
Technical Data Overview
| Property | Value |
|---|---|
| Price | approx. 1,200 euros (MSRP, as of August 2026) |
| Burr Size | 64 mm |
| Burr Type | Flat, Mazzer 233M |
| Operating Mode | Hopper / Grind by Weight |
| Grind Speed | 21.2 g / 10 Sec; 9.5 Sec for 18 g |
| Noise Level | 84.9 dB(A) |
| Grinding Temperature | 27.9–29.9 °C (average 28.5 °C; beans 22.6 °C) |
| Absolute Retention | 11.8 g (10.6 g temporary, 1.2 g permanent) |
| Consistency (Std. Dev) | 0.11 g over 5 × 18 g |
| x50 Espresso (T4 / T7) | 238.9 µm / 191.8 µm |
| Main Peak (T4 / T7) | 217.7 µm / 220.6 µm |
| Fines Peak (T4 / T7) | 32.1 µm / 40.1 µm |
| x50 Ristretto (T5) / Café Crème (T6) | 196.0 µm / 275.5 µm |
| RPM Control | No |
| Weight | 10 kg |
| Special Features | Grind by Weight, magnetic dosing cup with calibration weight, WiFi and app, firmware in test 2.1.00008 |
Where to Buy the Mazzer Mini G
We don't sell grinders. But we look at which specialty dealers really support a brand — with Mazzer that's Stoll Espresso in Germany.
Germany: Mazzer Mini G at Stoll Espresso*
We search for specialty partners we know do good work and provide good service. We're in close contact with the dealers. These are affiliate links. If you order through this link, it doesn't cost you more, but we get a small commission that we put into new test equipment.
As always, we tested this grinder according to our KM protocol and bought it ourselves. This test was not requested by Mazzer. The cups in the video come from the ceramic studio of Annika Vogler in Lindau am Bodensee. We bought the cups and are happy to show cups from small ceramic studios in our videos to support them.
















