Table water filters are a practical and simple way to filter good coffee water. As a rule, in almost all regions the water coming from the tap is too hard to prepare good coffee with it. At the same time, hard water also endangers your own coffee maker, as it enables limescale formation.
With table water filters or other filtration methods, water can be filtered so that it both tastes delicious and is good for coffee machines and espresso machines.
In this test, table water filters from BWT, Brita, Lotus Vita, LARQ, Aarke, Yucona and Peak were tested.
Good water values for making coffee
Perfect water for filter coffee:
Total hardness: 2 – 3 °dH
Alkalinity: 1 – 2 °dH
Perfect water for espresso:
Total hardness: 3 – 6 °dH
Alkalinity: 2 – 4 °dH
We have written more about the perfect water for coffee in our detailed blog post on "coffee water". Another test summarizes the results of the most commonly used in-line filter cartridges for espresso machines and fully automatic machines. So-called water filter pads can also soften water, but they take time.
To analyze your own water, we recommend you do a test with titration drops. In Switzerland you can get the test kit from bwt and in Germany the test kit from Brita from us.
Table water filters compared to water pads and in-line filters
In-line water filters generally provide the best water filtration. They are inserted into the water tank. Through the suction of the pump in the machine, the water is drawn through the filter with pressure and force. This achieves good filtration performance.
Water filter pads lie in a water tank and there is no movement of the water. The filter's performance therefore only develops over many hours. In our test we tested the filtration performance over many hours. Only after well over 20 hours did the water values move into the target range.
Table water filters are positioned between in-line filters and filter pads. The water flows through the filter inserts by gravity and is filtered in a few minutes. Some of the tested filters achieved good target values because they were designed for decarbonization. Other filters missed the target values, as the test shows.
We created two videos about table water filters. On the one hand, there is our main video with all the details and additional explanations.
On the other hand, we recorded a second version that briefly and to the point summarizes the results in just a few minutes.
How was the test conducted?
The table filters were first prepared according to the manufacturer's instructions. Then 1 liter, 5 liters, another 5 liters and then 10 liters of water were filtered. After each filtration, samples were taken and measured with test drops to determine water hardness and a conductivity meter.
LARQ Filter and Lotus Vita Filter
Both the Lotus Vita and the LARQ filter were recommended to us for testing by the coffee community. Both filters are presented to improve water quality in general, not explicitly as filters for preparing water for making coffee. Nevertheless, such a test is interesting and shows characteristics of different water filters. Both filters effectively filter total hardness, i.e. calcium and magnesium, from the water. However, they reduce alkalinity little or not at all. The hardness of our source water is 13 degrees German total hardness and 10 degrees German alkalinity. While the total hardness is reduced, we found the alkalinity to be insufficiently filtered to effectively filter water for coffee preparation.
We recommend both filters for effectively removing contaminants. The reduction in total hardness is sufficient to protect the coffee machine. The alkalinity is too high to brew delicious coffee.


Brita and BWT table water filters, Peak and Aarke
All four table water filters from Brita, BWT, Peak and Aarke are able to filter good coffee water. The filtration performance of the Brita filter as well as the Aarke filter was in a good range, while the BWT filter did not filter as effectively. To achieve the exact target values, the BWT filter would need a second filtration with our source water. The yucona filter also does not reach the target with a single filtration and must be used a second or third time depending on water hardness.
The Peak filter is the most versatile filter because flow reduction allows filtering more or less. This is particularly interesting for source water inputs of 10 to 15 dH total hardness. For water like ours with about 13 dH total hardness, a setting of 4.5 filtration power is certainly perfect. If you only have to deal with 12 dH total hardness, you can certainly also get by with a lower filtration power. This flexibility allows individual adjustment to local conditions - very nice!
Unfortunately, the processing quality of the Peak filter is not good. The pitcher appears cheap and unstable. Here the Aarke filter scores significantly better. The filter is made of glass, the filter insert of stainless steel. The filter can be refilled itself and next to a high-quality espresso machine as a filter makes the best impression.





Summary of results
The water filters from Peak, Aarke, Brita and to some extent BWT were convincing in the test. The Lotus Vita filter and the LARQ filter are primarily intended for filtering foreign particles from water and desalt the water. However, they do not sufficiently reduce alkalinity. The high retained alkalinity buffers the acidity of the coffee, which is important for the balance of a complex and delicious coffee.
The Yucona filter is a decarbonizer, but has only low performance. Among the filters suitable for coffee, it shows the least filtering effect in reducing alkalinity. Multiple filtrations of the water are necessary to achieve the target values.

All our articles on the topic of coffee and water can be found here.
















