Home / Coffee knowledge / Channeling - Avoiding channeling through the espresso puck
    Espresso
    Channeling - Kanalbildung durch den Espresso-Puck Vermeiden

    Channeling - Avoiding channeling through the espresso puck

    Anyone who engages more intensively with espresso preparation cannot avoid dealing with the concept of channeling. This refers to channel formation in the portafilter, which prevents even extraction and negatively affects coffee enjoyment.

    In coffee forums and video tutorials, one might almost think that channeling is the evil monster in the closet, just waiting to lurk around the corner and turn our beloved coffee into a bitter or sour nightmare. It seems as though channeling is the root of all evil in the world of coffee – a secret saboteur bent on ruining our perfect espressos!

    We advocate for composure when it comes to channeling! In the last 50 years, before bottomless portafilters were used, nobody thought about channeling. And yet most espresso brews tasted delicious and didn't ruin anyone's day.

    Since the Third Wave of Coffee and increased interest in the origin and production of coffee, every aspect of preparation has been analyzed more closely and scrutinized. Channel formation in the coffee puck negatively affects the taste of coffee, but it can be minimized extremely through simple steps! In our blog, we show you why channeling actually affects taste, how to recognize channeling in your espresso, and what mistakes to avoid when preparing espresso.

    What happens during channeling from a physical perspective?

    When brewing espresso, the brewing water is pushed through the coffee puck and portafilter at approximately 9 bar pressure. As you already know, the extraction time of the espresso decisively determines the taste of the espresso. The longer the water is in contact with the ground coffee powder, the more particles are extracted from the coffee. If the coffee is extracted too long, it becomes over-extracted, tastes bitter, and has an unpleasant mouthfeel. If the water runs through the coffee puck too quickly, the espresso is under-extracted. It then tastes sour and has a watery texture.

    By adjusting the grind setting of the grinder, we change the physical resistance for the water. The 9 bar pressure pushes on the coffee puck, and the coffee puck prevents the water from passing through. The water wins this battle, and the espresso comes slowly and creamily out of the portafilter.

    Water finds the path of least resistance. Especially when water is under pressure, it hisses out where a small hole opens or a boundary is too thin.

    This is exactly the effect that happens during channeling. If the coffee puck has a small crack in its surface when grinding, distributing, and tamping, or if a hidden hole is concealed in the puck, the water during extraction under pressure will take exactly this path. Instead of evenly extracting the entire coffee puck in 30 seconds, part of the brewing water shoots directly through this fracture into the cup.

    Although your grind setting may be perfectly adjusted, the coffee at this point in the coffee puck is extracted incorrectly. The areas around the crack in the coffee puck are extracted very strongly because all the water flows through there. The other areas of the coffee puck are under-extracted. The result in the cup is unbalanced and sometimes hardly drinkable.

    How do I recognize channeling in my espresso?

    If your coffee tastes sour, bitter, or simply unbalanced, that could be a sign of channeling. Of course, there can be other reasons. First, we recommend you watch our video on 20 typical mistakes in espresso preparation. If you've avoided all error sources and your espresso suddenly tastes undrinkable at irregular intervals, that's a clear sign that you occasionally have channeling.

    You can recognize channeling even better if you look closely at the outlet of your portafilter. If the espresso comes out in dark color and creamy consistency right away and distributes evenly over two espresso cups, then you definitely don't have a problem with channeling.

    However, if you see that very light, almost transparent water runs out at the beginning of extraction, you can be sure that unwanted channels have formed in the coffee puck. The water has then not properly extracted the coffee but has simply run past it. It can also happen that a fracture in the coffee puck breaks open only during extraction. In such a case, water bubbles out of the outlets in the middle of extraction, and the even flow is interrupted. With espresso machines like the Decent or Maro, a faster water flow is then visible in the graph.

    Bottomless portafilter?

    However, channeling can be recognized best with a bottomless portafilter. By looking at the underside of the basket, you can see whether the entire coffee is extracted evenly and runs down creamily, or whether there are individual spots where water sprays out.

    Ideally, the espresso from the bottomless portafilter initially flows evenly from all basket holes. Then the espresso gathers into a central stream in all shades of brown. It looks so good that the espresso must taste good too.

    We recognize channeling when thin water spritzer break out of the stream and, like from a water gun, spray around the cup and even land on the back wall of the espresso machine. These spritzer are often much more watery than the main flow of the espresso.

    But be careful: a small spritz to the side during extraction doesn't necessarily mean strong channeling. Micro-cracks during extraction always occur. What's most important is always the result in the cup.

    Is it worth reading coffee grounds?

    There are supposedly people who can even predict the future from coffee grounds. However, we have found that you should be very careful when searching for clues about channeling. Not every small hole in the coffee puck is a sign of channeling. For example, the escape of CO2 can also create superficial holes. Such small, superficial holes do not negatively affect taste and are completely normal.

    However, if you see large holes in your coffee puck that run from the top to the basket floor, you can be sure that this channel negatively affected the taste during extraction.

    How can I avoid channeling?

    Whether you're preparing espresso in a commercial establishment or at home, we show you in the following classic mistakes that promote channeling. If you avoid these mistakes, you significantly reduce the risk of channeling!

    Mistake 1: Tamping without distributing

    The coffee powder does not land evenly from the grinder into the portafilter. There is always a spot in the portafilter where a small coffee mountain forms during grinding. When you now remove the portafilter from the grinder and compress the coffee powder with the tamper, there are spots in the coffee puck where much more coffee powder is present than in others. The coffee puck may look smooth and even at first glance, but the water will shoot under pressure through the spots where there is less coffee powder, because there is less resistance there.

    That's why it's absolutely necessary to distribute the coffee powder after grinding. You can, for example, gently tap the portafilter on the work surface to let the coffee powder settle. You can also nudge the portafilter with gentle, sideways karate-like moves. A good WDT tool with a good distribution technique is a good tool for closing underground holes.

    Mistake 2: Ignoring the characteristics of your grinder

    Depending on what espresso grinder you use, different practices are needed in puck preparation and distribution. Especially some cheaper grinders clump the coffee heavily at finer grind settings. Others tend to heap the ground coffee more to one side in a tower. When distributing, you should consciously work against these phenomena.

    Clumps are a stubborn phenomenon that can almost only be broken up with a WDT tool. Wherever clumps are not loosened but instead pressed together, there's almost always a breaking point for the brewing water.

    Mistake 3: Tapping the tamper against the portafilter

    In some courses or internet tutorials, you are advised to tap the tamper against the portafilter once more after tamping. The idea behind this is that particles stuck to the edge of the portafilter due to static charge are pushed onto the coffee puck. Don't do this at all! The vibrations break open the already prepared coffee puck and create channels, especially at the edge of the portafilter, through which the water shoots.

    Mistake 4: Too much speed when locking in

    Even if it looks cool: when you lock in the portafilter, please handle it with care. Don't ram it abruptly into the brew group – after all, you're not loading a revolver! If you bang the portafilter against the brew group, it has the same effect as tapping with the tamper. The coffee puck cracks open, and channels form that can ruin your espresso enjoyment. Rather take an extra two seconds for careful locking and enjoy perfect extraction!

    Mistake 5: Sloppy work

    Clean work is one of the most important disciplines in making espresso. You should always rinse the portafilter thoroughly, on the one hand to preheat it, and on the other hand to remove old coffee grounds. After that, you must clean out the portafilter. Use, for example, our barista cloths. Due to the hydrophobic properties of coffee powder, a damp portafilter can promote channeling.

    Mistake 6: Using unsuitable dosing cups

    If you like to work with single dosing grinders, you first grind into a dosing cup and then pour the coffee from there into the portafilter. It sounds trivial, but it's a step that especially with poor dosing cups causes significantly more channeling than grinding directly into the portafilter.

    Poor dosing cups sink completely into the portafilter and leave a crater at the edge that can't be closed again to the bottom of the basket even with the best WDT technique. There are also dosing cups that particularly promote static charge. Others have hard edges at the bottom where the sides of the cup meet the base. This shape then makes an impression in the ground coffee like a Bundt cake pan when it's poured into the portafilter.

    That's why the bottom of our KM dosing cup is rounded and sits on the portafilter with side wings, so it doesn't sink into the puck.

    Messbecher51mm1

    The KM dosing cup is available for 51mm portafilters, which fit machines like the Delonghi Dedica, as well as for 58mm portafilters.

    Other factors that promote channeling

    When grinding coffee, the coffee particles become electrostatically charged. The coffee powder doesn't fall homogeneously into your portafilter but often forms small clumps. Depending on the grinder, these are more or less pronounced. The clumps can make even tamping difficult in the portafilter. If your grinder produces such large clumps, you can try to destroy the clumps by tapping the portafilter on the table surface or with a so-called WDT tool to create homogeneous coffee powder.

    The problem with many espresso gadgets, however, is that they must be used correctly and adjusted properly. If a leveler tool is set incorrectly or you rummage too hard in the coffee grounds with the WDT tool, you might end up creating exactly the channels you wanted to avoid.

    How to do WDT

    The Weiss Distribution Technique (WDT) was developed by John Weiss to dissolve coffee clumps in the portafilter and ensure even distribution before tamping. The coffee grounds are gently stirred with thin needles (0.3–0.5 mm) to avoid channeling and achieve better extraction. Ideally, the movement is slow and steady without stirring up the coffee bed too much. WDT can be combined with the Ross Droplet Technique (RDT) to reduce static charge already during grinding. After WDT, a leveling tool can be used to level the surface and further optimize extraction.

    A leveling tool is, in our view, more of a visual tool. We've listed the most important steps for preventing channeling further up.

    Conclusion: The most important thing in espresso is the barista

    It's very difficult to avoid channeling 100 percent of the time. And as we told you in the introduction, espresso can taste delicious even with slight channeling.

    Moreover, you don't need expensive WDT tools, levelers, or even a lengthy "puck preparation routine." What's much more important than these things is you as a confident barista.

    Invest in a good, solid grinder. When filling the portafilter, make sure the coffee grounds can settle well and don't form mountains. Tamp straight and don't get the portafilter into the brew group faster than Lucky Luke can draw his Colt.

    All these tips can be easily integrated into your workflow, take only a few seconds, and are completely free! Because the most important thing in espresso brewing is you as the barista!

    Channeling is one of several points where a shot can go wrong. You'll find the complete process in preparing espresso.

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy