Lelit not only builds espresso machines, but also grinders. The Steve is one such grinder, namely with 64 mm flat burrs, bean hopper, time dosing, from 469 euros (as of September 2026). And it is explicitly an espresso grinder and not intended for filter coffee.
It is the further development of the old Lelit William, which we already had on the table in the first grinder set. This is exactly what makes this test interesting: Between the two grinders or tests lie around five years. Has Lelit caught up with the state of the art in this time, or does the Steve remain a William with a new display? As grinder number 99 in our test field, it has quite a bit of comparison around it.
As always, we also bought the Lelit Steve ourselves to guarantee independent testing.
The short version in just a few minutes. The detailed test video with all measurements can be found at the end of the article.
Build quality: distinctive appearance, portafilter holder from yesterday

6.5 kilograms, 14 cm wide, 23 cm deep, 39 cm high. The Steve stands slim and tall on the work surface and has its own character: "Distinctive" is probably the best description, so whether it appeals to you is in the eye of the beholder. In appearance, it certainly matches well in white or black color versions with the color variants of the Lelit Elisabeth or a Mara. Lelit supplies it in brushed and polished stainless steel as well as in black, white and gold, always with a band of polished stainless steel on the side.
The portafilter holder, on the other hand, is a throwback to old times. Michel, our vice head barista, speaks of a flashback to the time when we started testing grinders: two side bars hold the portafilter and pressing it releases the grinding. The height adjustment is easy to change and every portafilter we have in the house fits into it. We tested ECM, Rocket, Ascaso, Lelit Mara, La Marzocco, among others. Time-tested, I would say, pragmatic and still fit for purpose.
The bean hopper holds 350 grams and is screwed on. You cannot remove it, and there is no slider to close the shaft. If you want to change beans, you tip the grinder and pour out what's left, including fragments.
Buy the Lelit Steve
The following specialty retailers* carry the Lelit Steve and we can recommend purchasing from these businesses.
Germany: Coffee24
* We search for specialty partners for you whom we know do good work and provide good service. We are in close contact with the retailers. These are affiliate links. If you order through this link, it won't cost you any more, but we get a small commission that we invest in new test equipment.
Display and dosing: the Lelit Steve doses by time

The new display is the most visible advance. A seven-digit LED display, two programmable dosages, a continuous mode, plus a button to grind more or cancel. Programming is simple: press once, set the time with plus and minus, wait a moment, done. Which of the two dosages runs is up to you, controlled via the portafilter switch with one or two presses.
The Steve doses by time, not by weight. So you tell the grinder six seconds and find out yourself how much coffee comes out. It's not particularly precise. With unchanged grind, we measure 18.5, 18.3, 18.4, 18.5 and 19.0 grams. This results in a standard deviation of 0.27 grams, and from 0.2 grams onwards it becomes disruptive for precise recipes. Michel is reminded of his early training course years, when he placed a scale, cup and spoon in front of all participants to grind into the cup, weigh and remove any excess. This is exactly how we work with the Lelit Steve.
Because the Steve doses by time and scatters in the process, it's better to weigh afterwards. We grind into the KM stainless steel measuring cup, which fits the 58 mm portafilter, and place it on the Timemore Black Mirror Mini. Whatever is too much, you scoop back out with the spoon, whatever is missing, you grind briefly. Two steps and the dose is right.
Volume and speed: the Lelit Steve grinds quickly and sounds full
The Steve excels here. With a full bean hopper, 30.3 grams come out in 10 seconds, 18 grams it manages in 6.1 seconds. That's swift, and in everyday use, speed brings joy, especially if you need to grind again anyway after a grind size adjustment.
In terms of volume, we measure 81.8 decibels, measured 20 cm in front of the grinder. This is in the middle range of our scale. Volume is not only expressed in loudness, but also in "quality": The Lelit Steve sounds pleasant, without shrill whining, and instead produces a full grinding sound. Compared to the original model, we are six to seven decibels quieter. Part of this may also be because we measured less precisely back then and had worse shielding.
Thermally, the grinder remains unobtrusive. The beans go in at 22.2 °C, the first sample is at 26.1 °C, after five consecutive grindings with 20 seconds rest we're at 31.0 °C, averaging 28.8 °C. This slight warming has no negative effect on taste. You would have to do a lot of shots in succession to taste the effect. So no worries.
Retention of the Lelit Steve: 5.5 grams and no single dosing
The retention is 5.5 grams absolute, of which 5.2 grams temporary and 0.3 grams permanent. So hardly anything permanently sticks in the grinding chamber itself, which reduces the cleaning requirement. That's pleasant because for a deep clean you always need a screwdriver. The 5.2 grams temporary are what shape everyday life: At 18 grams of shot, almost a third of the coffee landing in the sieve is a grinding that is one cycle old. If you make the next espresso the next morning, you start with coffee from yesterday that has already oxidized because it's no longer in whole bean form.
Compared to single-dosing grinders, these 5.2 grams is an enormous amount. In the range of grinders with bean hoppers, that's a medium value.
The actual step backward is elsewhere. The old William also had a lot of retention, but could be ground empty: one portion in, everything came back out. That doesn't work with the Steve anymore. In the single-dosing test, 5.2 grams remain in the grinder, and even if you patiently grind empty, you won't get below two to two and a half grams. Single dosing is thus not an option, not even as a workaround. On the positive side, what comes out is striking: the ground coffee is very fluffy even in the fine range, Lelit has worked on that.
So if you change grind size or beans, you first have to grind out these five grams before the new setting is even visible. And because the bean hopper is screwed on, changing beans is itself already a production.
Setting grind size: one click shifts the espresso by five seconds

Lelit has reworked the grind size adjustment ratio, the steps have become smaller. But they remain stepped, and one step makes about five seconds difference in espresso extraction time. It used to be five to ten. A quality step that makes setting easier, but still makes precise grinder adjustment difficult. If you land at 18 grams on 30 seconds extraction time but want 27.5, you can't get there with the coarse grind adjustment. The next step would be around 25 seconds. Michel had shots where one click went from 27 to 18 or 19 seconds.
Even the adjustment itself is tedious. At grind size 6 we measure 26 and 29 seconds with identical recipe, at grind size 6.5 twice 22 seconds. So you're not just looking for the right step, you're also getting partially different results on the same step.
Behind this is the play in the mechanics. The upper burr sits in a fine thread, the adjustment runs over a pinion. On one side fine thread, on the other side play, and in espresso, hundredths of a millimeter in burr distance determine the result.
We see this in numbers in the adjustment test. We start at grind size 6 with our espresso recipe, go to grind size 3 for the ristretto, to grind size 7 for the lungo and click back to 6. The x50 afterwards is 267.5 instead of 222.0 micrometers, the fine peak drops from 39.4 to 34.7 percent, the main peak grows from 243 to 268 micrometers. And in the cup it shows just as much: the same recipe that previously took 25 seconds runs through in 14 to 15 seconds after the return. We start wanting to readjust, but end up with a different coffee, and not the one we wanted.
You can cope with this if you run one bean and keep refilling that bean. If you regularly switch between coffee A, B and C, you're setting yourself up for a tedious battle and you're less likely to have the right grinder for it. And adjusting the amount instead of the grind size doesn't help either, that changes brew ratio, taste and recipe as well.
Particle distribution of the Lelit Steve: lots of body, broadly applicable
We measure particle distribution together with the Coffee Excellence Center of ZHAW on a Retsch Camsizer X2. We measured at our espresso setting with 18 grams in, 45 grams out and around 25 seconds.

The fine peak is pronounced. This gives you body and weight in the cup and somewhat less clarity. The main peak remains well below the threshold at which espressos appear scattered at 243 micrometers, so the ground coffee is nicely homogeneous. Together, this gives you a distribution with which you can do a lot. The Lelit Steve is suitable for dark roasts, the middle spectrum and lighter coffees too. The last complexity of a very light specialty, the Lelit Steve can't quite bring into the cup, but quite a lot of espresso with good quality. For many home baristas, this particle distribution image is a really good range.
For comparison, the other two points from the adjustment test: At ristretto, the x50 is at 155.3 micrometers with 44.5 percent fine peak, at lungo at 304.1 micrometers with 31.6 percent. So the grinder covers a wide range, it just doesn't hit it reliably again.
Espresso from the Lelit Steve: solid and full-bodied

We tasted with our reference coffee, the Apas Espresso, a dry-processed coffee from Brazil from the APAS cooperative. Michel chose it because a grinder that looks like a grinder from our early days also deserves the coffee from our early days. By now, the Apas is organic and noticeably sweeter than it was then: nutty, marzipan-like, sweet. What's exciting about it is that the coffee farmers of the cooperative, who switched to organic, had already achieved the higher specialty grades beforehand. This is also evident in the cup.
The espresso from the Steve was solid, with around 25 seconds extraction time and decent body. Set correctly and with retention ground out, you get a good result here. That's the good news from this test: the grinder can make espresso. The way to get there is the problem.
Cleaning the Lelit Steve: seven screws and plastic threads
For regular grinder cleaning, the grinding chamber needs to be opened so the fat particles clinging there come out. With the Steve, that's a procedure. First the beans have to be tipped out because there's no closure. Then loosen four screws for the cover, then three more for the pinion. The screws tighten in plastic threads, one already stripped on us. Care is required here! When you screw it back in, do so very gently.
Plus: in theory the construction is well solved because the adjustment runs via the pinion and unscrewing shouldn't change the grind size. In practice, after the pinion you're not yet in the grinding chamber, you have to unscrew the upper burr from its fine thread. You can mark the position, but you won't know how deep it sat in the thread afterwards. If you clean regularly, you recalibrate regularly. A good grinder cleaner is enough with the Lelit Steve though to solve the low permanent retention.
Conclusion: who the Lelit Steve is right for
The Lelit Steve is a fast, pleasantly running espresso grinder that delivers good espresso as soon as it's properly adjusted. This adjustment is precisely its weakness.
Strengths: It's very quick at 30.3 grams in 10 seconds and 18 grams in 6.1 seconds. At 81.8 decibels with pleasant grinding sound, it's clearly quieter than the previous model. Thermally it remains uncritical, 26.1 °C at the first and 31.0 °C at the fifth sample. The particle distribution provides lots of body and is broadly applicable from dark to medium roasts. And a bean hopper with time dosing has become rare in this price range. The ground coffee falls fluffy into the sieve.
Weaknesses: The stepped grind adjustment shifts extraction per click by around five seconds, plus results fluctuate on the same step. Because of play in pinion and thread, the same recipe runs through in 14 to 15 instead of 25 seconds after returning to the starting grind size. 5.5 grams retention, of which 5.2 grams temporary, and single dosing no longer works. The bean hopper is screwed on and has no closure slider, bean changes are inconvenient. For cleaning you loosen seven screws in plastic threads, then the grind size is gone. And time dosing scatters by 0.27 grams.
For whom? For you if you run one bean, keep refilling that bean and want a bean hopper with two dosages. If you adjust once and then make espresso in peace, you'll get along well with the Steve and have a fast grinder on the counter.
Not for whom? For anyone who frequently changes beans, works with multiple coffees in parallel, or wants to dial in their recipe to the second. And for anyone considering single dosing.
Value for money: At around 469 euros, the Steve is not uncontested. In this price range you'll find in our grinder test field grinders with less retention and similar particle distribution, many of them single-dosing grinders where you can additionally choose the direction of distribution. What the Steve sets against that is the combination of bean hopper, time dosing and speed. That's actually rare in this class. For five years of development time since the William, it's too little for us: the new display and smaller grind steps are advances, the screwed-on bean hopper was already a drawback five years ago.
Lelit recently made great strides with espresso machines and apparently benefited from the expertise of new parent Sage Breville. We don't see much grinder knowhow from the same family here yet. Michel's and my half-serious rule remains: with Lelit, check the name. Elisabeth, Mara, Bianca have convinced us. Fred, William and Steve not yet. So the women rock it at Lelit and the men are a bit outdated.
Technical specifications at a glance
| Property | Value |
|---|---|
| Price | from 469 euros (as of September 2026) |
| Burrs | 64 mm, flat (manufacturer specification) |
| Operating mode | Bean hopper, time dosing |
| Dosing | two programmable times, continuous mode, 7-digit LED display |
| Grind size adjustment | stepped, fine adjustment via pinion and fine thread, factory setting grind size 3 |
| Grinding speed | 30.3 g / 10 sec; 18 g in 6.1 sec |
| Volume | 81.8 dB(A) |
| Grinding temperature | 26.1–31.0 °C (first to fifth sample), average 28.8 °C |
| Retention absolute | 5.5 g (5.2 g temporary, 0.3 g permanent) |
| Single dosing deviation | 5.2 g |
| Consistency (std. dev.) | 0.27 g over 5 × 18 g |
| x50 (espresso, T4) | 222.0 µm |
| Fine peak (T4) | 39.4 % |
| Main peak (T4) | 243 µm |
| x50 after reset (T7) | 267.5 µm |
| RPM control | no |
| Bean hopper | 350 g, screwed, no closure slider |
| Dimensions (W × D × H) | 14 × 23 × 39 cm |
| Weight | 6.5 kg |
| Mains voltage | 220–240 V, 50/60 Hz |
| Versions | Stainless steel brushed, stainless steel polished, black, white, gold |
All measured values according to the KM test protocol for espresso grinders determined by ourselves, particle distribution in cooperation with the Coffee Excellence Center of ZHAW.
The detailed test video for the Lelit Steve
The complete test with Michel: retention, grind size adjustment, particle distribution and tasting.
As always, we bought this grinder ourselves. This test was not requested by Lelit.
















