Home / Coffee knowledge / Varia VS4 Review: Plenty of Innovation, One Retention Problem
    Espressomühlen
    Varia VS4 im Test: viel Innovation, ein Totraum-Problem

    Varia VS4 Review: Plenty of Innovation, One Retention Problem

    The Varia VS4 was one of the most anticipated grinders of recent months. When we first held it in our hands at a coffee trade show, we raved about it. Now we've completed the detailed test: we took almost half a year to thoroughly test two Varia VS4s completely. We wanted to make no mistakes and confirm our findings with a second grinder. It costs 499 US dollars directly from the Varia online shop, here it's just under 500 euros, in size between the smaller VS3 and the larger VS6. A 53 mm conical burr, a brushless motor, and once again a genuine single-dosing grinder. The question we've been pursuing for months: Does the VS4 deliver on the hype, and what's going on with its particle distribution?

    Aluminum block with two genuine innovations

    The VS4 sits as a compact aluminum block on the counter, weighing a good 5 kilos, just under 10 cm wide, 33 cm high, 16 cm deep. It looks high quality and sits solidly on the test table. The package now includes a 58 mm dosing cup, while the VS3 came with a small cup that nobody was really happy with. The new cup is high quality, but has one peculiarity: if you leave it on while grinding, it sinks down and its rim slides into the portafilter. We're not fans of a rim that protrudes into the portafilter. In practice, we had hardly any channeling at the rim because this rim is very narrow. Anyone who also distributes with a needle tool (WDT) has the issue completely resolved.

    Two things about the VS4 really excite us. The first is the grind setting adjustment. It is now decoupled from the body of the grinder and, more importantly, from the blast nozzle. With the VS6, the adjustment was fine and precise, but when blowing with the blast nozzle, you often accidentally adjusted the grind size as well. That doesn't happen here anymore because there's no longer direct pressure on the adjustment ring. Plus, there's a scale whose indicator line points precisely to the respective line. One line corresponds to approximately one to one and a half, in the worst case two seconds of extraction time. It doesn't get much finer in the home category.

    The second major strength of the construction is that the grinder can be opened and cleaned with just one hand. You remove the grinding chamber in just a few seconds, brush it out, put it back in, done. We no longer need to discuss grinder cleaner for this grinder—you don't need it here. Why this ability to open the grinder so quickly is a not-to-be-underestimated advantage comes up again, rather unintentionally, when discussing retention.

    Buy Varia VS4

    The following specialty retailers* carry the Varia VS4 and we can recommend purchasing from these businesses.

    Germany: Lücke-Technik

    * We search for specialty partners for you, ones we know do good work and provide good service. We stay in close touch with the dealers. These are affiliate links. When you order through this link, it doesn't cost you any more, but we get a small commission that we invest in new test equipment.

    The Burr: 53 mm Conical, Low Speed

    Inside, a 53 mm conical burr works, driven by a 200-watt brushless motor with planetary gearbox. You adjust the speed using a dial on the side between 150 and 300 RPM in 50 RPM increments — deliberately slow for an espresso grinder. The grind adjustment runs continuously via an internal thread with 10-micrometer resolution. Active ionization is built in to prevent static buildup, and an RDT spray bottle is included anyway.

    Faster and More Pleasant Than the VS3

    Varia has noticeably stepped up here. For 18 grams, the VS4 needs around 13 seconds. The VS3 took about 30 seconds, so roughly double. In the morning, that makes a difference.

    Sound levels are interesting because the number alone can be misleading. We measure around 80 to 81 decibels (precisely: 81.5 dB at 150 RPM, 82.5 dB at 300 RPM). The VS3 came in at 73 decibels on paper, noticeably lower, but sounded shrill and aggressive — a high tone over 30 seconds, somewhere between a bee and a circular saw. The VS4 has a deeper hum, more like a speedy bumblebee, and sounds powerful rather than like a motor on its last legs. Subjectively, it's more pleasant even though the meter shows more decibels.

    The temperature of the ground coffee stays unproblematic. On the first unit, we measure an average of 26.9 °C, close to room temperature; the second ran slightly warmer at 30.4 °C. Both are in the green zone. Consistency across portions is very good with a standard deviation of 0.08 grams.

    Retention: The Sore Spot

    We're troubled by retention, that is, the retention. With a single-dosing grinder, we want the coffee we put in at the top to come back out at the bottom. We already consider more than 0.7 grams of temporary retention problematic for this design. The VS4 sits at around 1.8 grams of temporary retention, plus about 0.2 grams of permanent retention, totaling around 2 grams absolute. For a single-dosing grinder, that's a poor value.

    That's surprising at first, because conical burrs usually have little retention since coffee doesn't stick much to the cone itself. The problem lies elsewhere: in the drive pins that rotate under the cone. Coffee sticks there, breaks off, and falls back down with the next grind. We measured this the way we do with every grinder: one grind, weigh, vacuum empty, clean, and repeat five times. After the first grind with a clean chamber, more than 0.4 to 0.8 grams remained stuck each time.

    The trick is in the design. The more permanent retention accumulates in the drive pins, the more fresh coffee it holds back next time, and the larger the temporary portion becomes. If you ignore this phenomenon, you quickly have more than a gram of old coffee in the chamber — in the worst case, several weeks old — mixing into fresh grounds. But you can open the grinder faster than you refill it, and that's exactly what defuses the high value.

    Plan for Cleaning

    The VS4 is only a good single-dosing grinder if you regularly open it and brush it out. That takes less than a minute. If you neglect it, the temporary retention keeps growing, and the first espresso after a longer break tastes flat.

    In pure throughput, single dosing works solidly: 18 grams in, plus or minus 18 grams out. Sometimes it's 17.7 or 17.8 grams, then you know a bit more stuck and of course part of the current coffee still comes from the last grind. So the coffee is reliably exchanged, just with this sediment that travels along.

    Operation and Grind Repeatability

    Operation is very good. RPM dial on the right, turn it on, the grinder grinds until you stop it.

    Grind repeatability is real fun. We switched from espresso to ristretto, then to lungo, and back to espresso, and the VS4 finds its starting point cleanly again. The peak width comes back at 279.4 versus 277.1 micrometers, practically identical. Together with the fine, decoupled adjustment, this ranks among this grinder's real strengths.

    Particle Distribution: A Tale of Two Measurements

    This is where it gets interesting, and unfortunately the result isn't positive for everyone. Early in the year, we measured the first unit and got a very broad particle distribution with a main peak of 308 or 316 micrometers. That was noticeably higher than we expected. So we decided to take a second measurement and order another VS4 model.

    The second measurement shows solid particle distribution. At the lowest speed, the main peak is at 279 micrometers, the median (x50) around 254. At 300 RPM, the main peak rises to 299. So the VS4 is still on the broader side, but at low speed somewhat further away from values we describe sensorically as unbalanced and sometimes scattered. A classic, good value we've known from the market for a long time. Clarity grinders for light specialty coffees sit more around under 240, the best at 160 to 170 micrometers. That's a different grind profile than what the VS4 delivers.

    The fine fraction is relatively high at around 36 percent. That brings a certain dustiness, but also supports body. Overall, this is a distribution related to the VS3. Both grinders work with a conical burr and both show their strength with body-forward, classic coffees. For fruity coffees you want to brew for maximum clarity, they're the wrong choice, and we'd go for the VS6 in the Varia family.

    Our Speed Recommendation

    Stick with 150 RPM. The coffee becomes more balanced, the main peak narrower, the fine fraction lower. There's hardly an argument for 300 RPM except if you want to grind a few seconds faster and consciously accept the quality compromise.

    In the Cup

    We tasted blind with our reference coffee, additionally in the video with our Compadre, an Italian-style espresso focused on body. That's exactly what the VS4 delivers: a dense, creamy espresso that sits heavy in your mouth and fills the cup. Somewhat dusty, yes, but fitting for this kind of coffee that wants to be this rich in the cup. With classic and medium roasts, the grinder feels at home. With light, very complex coffees, the result is satisfactory but not its specialty.

    Conclusion

    The Varia VS4 is a very good grinder for clear use cases, and it's fun in everyday use. The grind adjustment and simple opening are real innovations; operation and repeatability rank among the best in this class, and it's noticeably faster and more pleasant than the VS3. For around 500 euros, you get a lot of grinder and quality too.

    The catch is retention. At around 2 grams absolute, it's too high for a single-dosing grinder, and it builds up if you ignore it. The fact that you can open and brush out the grinder in seconds defuses that, but doesn't eliminate it: this grinder needs regular cleaning.

    Who is it made for? For anyone who wants to pull solid, body-forward espresso from classic to medium roasts and is willing to clean it regularly. If you switch between one, two medium or darker roasts, you're in the right place. It's less suitable if you change beans very frequently and want to brew many light, complex specialty coffees for maximum clarity. Then the high retention and rather broad distribution work against you, and you're better served with the larger VS6 or a clarity-oriented grinder.

    As always, we sourced the grinder ourselves and tested it independently.

    Test Results: Varia VS4

    Performance & Measurements
    Volume 81.5 dB
    Speed / 10 Sec 15 g
    Speed / 18 g 13 Sec
    Temperature 26.9 °C

    Retention
    Temporary Retention 1.8 g
    Permanent Retention 0.2 g
    Absolute Retention 2 g
    Single Dosing Performance 1.8 g
    Practical Evaluation
    Consistency (Std Dev) 0.08
    Usability very good
    Grind Size Reproducibility very good
    Cleaning Usability very good
    Espresso Potential good
    Price 499 USD (Varia Online Shop), just under 500 euros
    Burr Size 53 mm
    Burr Type Conical, stainless steel
    Operating Mode Single Dosing
    Grinding Speed 13 Sec for 18 g (Unit 2: 12 Sec)
    Volume 81.5 dB (150 RPM) / 82.5 dB (300 RPM)
    Grinding Temperature 26.9 °C (Unit 1) / 30.4 °C (Unit 2)
    Absolute Retention ~2 g (of which ~1.8 g temporary, ~0.2 g permanent)
    Single Dosing Deviation ~1.8 g (Retention)
    Consistency (Std Dev) 0.08 g (Unit 1) / 0.05 g (Unit 2)
    x50 (Espresso) 254 µm (150 RPM) / 235 µm (300 RPM)
    Main Peak (Peak Width) 279 µm (150 RPM) / 299 µm (300 RPM)
    Fine Fraction Qf <100 µm around 36 % (150 RPM) / around 39 % (300 RPM)
    RPM Control Yes, 150–300 RPM in 50 increments
    Motor 200 W Brushless with Planetary Gearbox
    Weight just over 5 kg
    Dimensions (W × H × D) ~10 × 33 × 16 cm
    Special Features Tool-free openable grinding chamber, decoupled grind size adjustment, active ionization, stepless 10-µm adjustment

    You can find all our espresso grinder tests in the espresso grinder overview.

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy