Home / Coffee knowledge / The thick-film heater era has begun!
    Espressomaschinen
    Das Dickfilmheizer-Zeitalter hat begonnen!

    The thick-film heater era has begun!

    In 2018, we came across the first espresso machines with thin-film heaters. Meanwhile, thin-film heater technology known as Flow Through Heater (FTH), Fast Through Heater, or ThermoJet has arrived in the espresso machine and Kaffeemacher market. Thin-film heaters have not only overtaken the classic thermoblock in terms of performance and flexibility, but are increasingly putting pressure on manufacturers of traditional espresso machines with boilers.

    In 2018, we tested the Sage Bambino from Australian manufacturer Breville, which operates in Europe under the name Sage Appliances. The machine was impressively fast to reach operating temperature, but left something to be desired in terms of temperature consistency. Shortly after, the Sage Barista Pro also landed on our test bench, and by then it became clear: the potential of thin-film heaters is enormous.

    Both machines were equipped with a thin-film heater from Dutch company Ferro Techniek. While Sage introduced its thin-film heaters with the trendy marketing name "ThermoJet", the heating elements are called Flow Through Heater by the manufacturer itself. How the Flow Through Heater works, which machines it now appears in, and what this means for the market is the subject of this article.

    Maro, Zuriga, Sage and Co.

    What do Maro, Zuriga Generation 2, and Unica have in common with Sage Bambino and Sage Barista Pro? They share a heating technology: the thin-film heater. And they are in good company. Because the Tone filter coffee machine, the Aiden Precision Coffee Maker, or the ETNA milk system also rely on the thin-film heater. The list of manufacturers relying on thin-film heaters from Ferro will soon be supplemented by two more innovative espresso machines: Roxy Espresso and nunc.

    Background: Ferro Techniek

    What an amazing success story the Dutch company from Gaanderen in Gelderland can demonstrate. The company specializes in thin-film heating elements printed on metal substrates and provides customized solutions for various industries. Ferro is part of the Otter Control Group and manufactures in the Netherlands, Hungary, the United Kingdom, and China. At the headquarters in Gaanderen, around 50 employees work, with a further 80 in Budapest at Ferro Electronics. The Otter Group employs approximately 1,500 employees worldwide.

    The history of Ferro's Flow Through Heater took off in 2013. The manufacturer put together a "developer kit" that contained everything needed to build prototype applications. Part of the kit was the FTH MK2 along with a pump, a flow meter, and a control board. This kit was ordered by around 100 companies.

    Interestingly, Ferro already developed an older version of the FTH, the so-called "FTH MK1", in 2007. However, this could handle a maximum of 2.5 bar pressure and was therefore used in pad machines. Brewing espresso requires pressure standards of up to 15 bar depending on the pump.

    The "FTH MK2", which is suitable for espresso and can also generate steam for frothing milk, was completed as a proof-of-principle in 2010. Production of the FTH was then ramped up in 2015, with Sage/Breville as a first mover being central to the success story of the thin-film heater.

    Current measurement log Maro Model 1
    Current measurement log of the Maro Model 1 recorded by us during operation.

    What are the strengths of the thin-film heater?

    The thin-film heater has significant advantages over boiler and thermoblock systems:

    Fast heat-up times: The low thermal mass of the FTH enables extremely fast heat-up times, since only a small amount of water needs to be heated. The Maro Model 1, for example, only needs 4 minutes to reach operating temperature. The Zuriga E2 Generation 2 heats up in just 2 minutes. The thin-film heater is each even faster to get ready; it's the more sluggish thermal elements like the portafilter that lag behind.
    High energy efficiency: FTH systems heat on demand through flow. This avoids wasting energy by constantly keeping large amounts of water warm. The Zuriga E2 Generation 2 achieves a peak value of only 0.058 kWh for 5 double espresso shots including heat-up time. For comparison: many espresso machines with boilers consume 0.2 to 0.5 kWh for 5 shots including heat-up.
    Precise temperature control: The flat design and direct heat transfer enable very accurate and fast water temperature regulation. The Maro Model 1 sets standards here and belongs, even after just 4 minutes, to the three most precise espresso machines in terms of temperature stability that we have ever measured. Fast adjustments of temperature up or down are no problem.
    Performance peaks & steam: The potential becomes apparent in steam generation: within a few seconds, the heaters are ready for frothing.
    Compact design: Small size enables very compact machines or integration directly into the brew group (e.g., flat 60W thin-film heaters for heating the brew group).
    Reduced scaling: Since no standing water remains in the thin-film heater, significantly less scale formation occurs according to Ferro. Additionally, uncomplicated descaling is possible.
    Maro temperature performance
    Temperature performance of the Maro Model 1: fast response and high stability.

    How do thin-film heaters work?

    The water to be heated flows through a flat channel that is integrated directly into the substrate of the thin-film heater. This channel is shaped so that the water flow is optimized and heat transfer is maximized.

    Component Construction Detail
    Material The channel typically consists of the same material as the substrate (usually stainless steel).
    Shape & Geometry Tubular or branched geometries to generate targeted turbulence for optimal heating.
    Manufacturing Deep drawing and special joining processes for seamless integration into the heating element.
    Pressure resistance Designed for the espresso pressure range of up to 15 bar (MK2 generation).

    Through direct integration of the channel into the FTH substrate, immediate and highly efficient heat transfer is ensured from the printed resistance element to the flowing water.

    Unica and Maro thin-film heaters compared
    Integrated thin-film heaters in modern espresso machines like Unica and Maro.

    Integration and control of temperature sensors

    The flat design and fast response time require highly precise sensor technology and control systems. Since there is hardly any thermal mass for buffering, the control must adjust in real time:

    Microcontroller control in the FTH

    Modern FTH systems use microcontrollers that compare values in millisecond ranges:

    NTC sensors: Are installed directly in the water channel to precisely detect the temperature of flowing water.
    Flow rate adaptation: Fluctuations in flow (e.g., due to finer or coarser grind) are detected and heating power is instantly adjusted.
    Profile control: Enables variable temperature curves during a single espresso shot.

    Different systems, different FTHs

    Depending on the application area, different FTH models from Ferro are used:

    Machine System Installed Thin-film Heater Application Area
    Maro Model 1 FTH II 2300 W Maximum power for flow & steam
    Sage Bambino FTH II 1500 W / 2300 W Compact household ThermoJet
    Zuriga E2 Gen 2 FTH II 1400 W + 600 W brew group Separate heating for water/steam & group
    Maro with thin-film heater
    View of the installed FTH heating element in the Maro Model 1.

    Challenges and future prospects

    Precise control of the FTH presents one of the greatest challenges: without buffering thermal mass, inaccurate control loops immediately lead to temperature fluctuations. That integration is demanding was shown by early models from Sage/Breville. While fluctuations could still be measured in the first generations, further development demonstrates the enormous potential.

    Manufacturers like Zuriga and Maro demonstrate impressively what performance is in this technology. The thin-film heater flexibly handles all tasks: heating the brewing water, generating steam, and heating the brew group and portafilter.

    Conclusion & Outlook

    With the thin-film heater, a new era has begun in the espresso machine market. Especially in the home segment, the FTH offers almost exclusively advantages over classic boiler systems: it heats up in a few minutes, saves massive energy, and allows precise temperature profiles.

    The first applications in the gastronomic sector are also approaching. Manufacturers like Tone are already working on gastro concepts with thin-film heaters, and the continuous load tests of the Maro also show excellent temperature consistency even at high frequency.

    Overview: Machines with thin-film heaters

    Year of Release Machine / Model Features / Heating Element
    2018 Sage / Breville Bambino Plus FTH II 2300W ("ThermoJet")
    2019 Sage / Breville Bambino FTH II 2300W
    2020 Sage / Breville Barista Pro FTH ThermoJet System
    2021 Sage / Breville Barista Touch FTH ThermoJet System
    2022 Unica Pro FTH II 1800W
    2022 / 2023 Tone filter coffee machine Gastro flow-through heater FTH
    2024 Maro Model 1 FTH II 2300W – High Precision
    2024 Zuriga Generation 2 (E2) FTH II 1400W + 600W group heating
    2024 Sage / Breville Oracle Jet ThermoJet Dual System
    2024 Aiden Precision Coffee Maker Precision filter coffee machine
    In Development Roxy Espresso Compact portafilter with FTH
    In Development nunc. coffee Smart espresso system
    In Development datum.coffee Innovation project
    Other Systems ETNA Milk System FTH for milk heating

    Further test reports & articles

    Maro Model 1 Test High-end espresso machine with 2300W thin-film heater and outstanding temperature stability.
    Zuriga E2 Generation 2 Up to temperature in 2 minutes: the Swiss minimalist machine in detail.
    Sage Barista Pro Test One of the first popular espresso machines with ThermoJet technology.
    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy