The Sage Barista Touch is a combination machine. It combines a grinder and an espresso machine. This is practical and has some advantages, such as the small footprint. On the other hand, it is difficult to upgrade.
We have tested the grinder and the machine thoroughly and reveal in the following test report how the Barista Touch performed.
Semi-automatic with fully automatic appearance
This machine attempts a balancing act between a classic portafilter machine and a fully automatic machine. Almost all settings are controlled via the display, except for the grind size. This is adjusted with a dial.
In the menu you can then select many different coffee drinks, such as Flat White, Cappuccino or Americano. But on closer inspection you quickly notice that most drinks are made with the same settings. This is simply because espresso is used as the base for most mixed drinks.
The amount of coffee that is ground can only be adjusted in one-second increments on the Barista Touch. This is very unfortunate. The Smart Grinder Pro grinder from the same manufacturer can do this to a tenth of a second, and the Barista Pro, also a combination machine, to half a second. One second, however, as here with the Barista Touch, makes a huge difference. If you want 18 grams of coffee, using one second too little might only give you 17.5 grams, but one second more then gives you 18.5 grams. That's annoying.
During the brewing process, the Sage Barista Touch supports the user with tips on the display. However, some of these tips are simply wrong. The ideal extraction time for an espresso is stated to be about 10-12 seconds, but a time of around 25 seconds should actually be aimed for. With the suggested 10 seconds, the espresso tastes as sour as hot lemon.
The machine suggests 10 to 12 seconds of extraction time. Instead, aim for around 25 seconds – only then is the espresso no longer under-extracted and sour. How to get there is explained in our article on extraction time for espresso and on the correct grind size.

A display with touch and little else
Some settings on the Barista Touch are very helpful. For example, you can adjust the milk temperature and the milk foam level. The milk frothing performance is excellent overall. The display, which is actually the core of this machine, is not really necessary for the machine to function. Moreover, it responds rather poorly, for example compared to a smartphone display.
Unfortunately, the Barista Touch feels a bit like a mashup of the Sage Barista Pro and the Oracle Touch. But it doesn't really come across as convincing.
Temperature excess – how far above 100 does it go?
The Barista Touch works with a thin-film heater, which Sage sells under the marketing name ThermoJet. So there's no thermoblock in here. This is supposed to be a further development of the flow-through heater. The advantage is that the machine is hot after just 3 seconds. The energy transfer is enormous and the machine's power consumption is extremely low.
The heat is transferred to the brewing water via a heating plate. This is faster than with a thermoblock, whose intermediate aluminum block is sluggish when heating. It would even be conceivable with the thin-film heater to run different temperature profiles. But unfortunately, the Barista Touch does not have a precise temperature control unit installed. There are 8 adjustable temperature levels in total, but even the lowest level reaches 98 degrees Celsius and is thus much too hot. We aimed for a temperature of 93 degrees, but we couldn't achieve it at any setting.
But what does the too-hot temperature do to the espresso? An espresso brewed too hot tastes very bitter, dry and harsh. That's just not fun. So you can't really brew a delicious espresso with the Barista Touch.
Milk foam of dual-boiler quality
Another aspect is the milk frothing performance. You can froth milk automatically or manually. The steam wand is ready to froth immediately after the espresso shot, almost like on a dual-boiler machine. Simultaneous frothing during extraction is not possible. With the automatic function, the temperature of the milk pitcher is measured via a sensor near the drip tray. The milk temperature can be adjusted and runs very accurately. The automatic function works well and you can also create great milk foam manually. However, we recommend switching to the manual method to really create fine-pored Latte Art foam.
Included accessories, size and upgradability
The package includes two single-walled filter baskets and one double-walled filter basket. Also a milk pitcher and a tamper. The included Sage Razor is supposed to allow you to remove coffee powder from the portafilter if too much has been ground in. With a properly adjusted grinder, this shouldn't happen though.
The Sage Barista Touch is 34 cm wide, 41 cm deep and 40.6 cm high. The two-liter water tank is easy to remove and the machine's construction with its brushed stainless steel looks high-quality.
| Feature | Sage Barista Touch |
|---|---|
| Type | Combination machine with integrated grinder |
| Heating system | Thin-film heater (ThermoJet), ready to use after 3 seconds |
| Temperature settings | 8 levels, lowest at 98 °C |
| Water dosing | Time control, no volumetric |
| Grind dosing | Only in whole-second increments |
| Milk foam | Automatic and manual, temperature adjustable |
| Dimensions (W × D × H) | 34 × 41 × 40.6 cm |
| Water tank | 2 liters, removable |
| Included accessories | 2 single-walled filter baskets, 1 double-walled filter basket, milk pitcher, tamper, Sage Razor |
"Volumetric control" for espresso
Although the Sage website states that the Touch has volumetric control, we cannot confirm this. The water volume is not dosed via volumetrics, but via time control.
Volumetric control always delivers the same amount of water through the coffee puck. For example, if you set it to 45 grams of water, that amount will always be delivered. The resistance of the coffee is irrelevant here. The flow time increases or decreases depending on how fine the coffee is ground, but you always end up with 45 grams of water.
With the Barista Touch, you can adjust the brewing time. If the coffee powder is too fine, you might only get a few milliliters in your cup; with a grind that's too coarse, the cup will almost overflow.
For beginners, volumetric control makes much more sense. The brewing recipe (e.g., 1 part coffee to 2.5 parts water) doesn't change. You only adjust the flow speed through the grind size. With time control, on the other hand, you have to fiddle with your brewing ratio every time you adjust the water volume. This is more complicated and makes using a scale essential. This is not beginner-friendly.
Conclusion on the Sage Barista Touch
As a pure milk frother, the Barista Touch would really be great. It froths well and reliably and is fun for any barista.
But unfortunately the pulled espressos don't taste good. The brewing temperature is inconsistent and much too hot.
So you should seriously consider whether the premium price for the Barista Touch makes sense. Other Sage models, such as the Bambino Plus or the Barista Pro, are hardly inferior to the Barista Touch. Whether you're willing to pay the premium price for the Barista Touch just for the automatic milk frothing function is up to you to decide.
But for €1,000 there are also alternatives from other manufacturers that you should consider, such as the Quick Mill Orione 3000 or the Gaggia New Classic. Some dual-boiler machines are also available at this price point.
















