Home / Coffee knowledge / What is retention in a coffee grinder?
    Espressomühlen
    Was ist Totraum in einer Kaffeemühle?

    What is retention in a coffee grinder?

    As retention is referred to as the empty space of a Kaffeemacher in which already ground coffee accumulates that is not part of the current grinding and is ejected. Good grinders have low retention and eject most of the ground coffee.

    Retention is created by free spaces around the grinding discs. Long and convoluted discharge paths that the ground coffee must traverse after grinding on its way to the outlet increase retention. In the English language, the term is retention, referring to the remaining ground coffee. We distinguish between permanent, temporary, and absolute retention.

    In permanent retention, coffee powder adheres permanently. Temporary retention is emptied and refilled with each grind. Absolute retention is the sum of permanent and temporary retention.

    Retention x54

    What taste effects does retention have?

    The larger the retention, the greater the taste impact on coffee flavor. In retention is ground coffee. As long as coffee is in whole bean form in the bean hopper, the speed of aging is low. During grinding, the coffee is broken into many small particles. This causes it to lose its own protective layer that it previously formed. The specific surface area increases many times over. Before grinding, oxygen and light only reacted with the whole bean, but now they easily reach every particle.

    As a result, the chemical components contained in the coffee react with external factors such as oxygen and light. The oils inherent in the coffee oxidize rapidly. Aroma components dissipate. Already 15 minutes after grinding, a significant portion of volatile components have disappeared.

    Taste-wise, oxidation of particles is strongly noticeable. Already 30 minutes after grinding, a sensory difference can be perceived in darker coffees, which increases significantly. If a lot of old coffee sits in the grinder, the coffee tastes unpleasantly sharp, rancid, and pungent. In the aftertaste, an astringent dryness remains on the tongue.

    Additionally, old coffee becomes flat and loses complexity through the loss of volatile aroma components. With large retention, it can make up half of the new espresso. The taste consequences are accordingly significant.

    retention rocket

    Retention impact on extraction

    Old coffee in retention also affects extraction and the flow behavior of the coffee. This is particularly significant in espresso preparation. Old coffee builds a different resistance in the portafilter than freshly ground coffee. At high humidity, the older coffee sometimes builds a higher resistance because it clumps and sticks together. At the same time, this coffee no longer flows well into the portafilter, which can lead to channeling.

    Large retention makes it difficult to adjust the grinder. If, for example, an espresso runs too fast, we adjust the grinder finer. When the next espresso is pulled and the retention is 9 grams, there are still 9 grams of "old" coffee and thus also coffee with the previous grind setting in the grinder. These must first be ground out to see the effects of the grinder adjustment. If the 9 grams are not first ground out, the subsequent grind size adjustment is made on an incorrect basis. As a result, the inexperienced home barista quickly loses track and despairs at setting the espresso. That's why the important rule: with grinders with large retention, always grind out the retention between adjusting the grind setting!

    Permanent retention

    In permanent retention, coffee powder permanently adheres to the grinder. Once the permanent retention is filled, it is not replaced with each grind. Typical spots that create permanent retention are the grooves in screw heads. Also around the grinding discs, some grinders form a permanent coffee powder layer. In the area before or behind the flapper, a small amount of coffee powder also tends to build up, which adheres permanently and rarely comes loose.

    When it does come loose, it causes fluctuations in the amount of coffee powder from one extraction to the next.

    Theoretically, permanent retention is relatively neutral to consider. It has no direct impact on the dispensed ground coffee and is not part of the next extraction. However, this coffee slowly ages and creates a rancid atmosphere in the grinder. Since coffee itself normally does not mold, this is relatively unproblematic from a food hygiene perspective. Sensory-wise, however, the abrasion of old coffee has an impact on taste. The impact is pronounced when the coffee in a larger temporary retention is in long contact with the coffee in permanent retention. If coffee is pulled frequently and regularly and the permanent retention is less than 2 grams, the impact is minimal.

    retention graef cm 800 and gang

    Temporary retention

    Temporary retention empties and fills with each grind. The coffee remains as residue from one grind in the grinder. Instead, the old coffee powder that was in the grinder from the last grind in the retention is ejected.

    Retention ranges from 0 to over 10 grams depending on the grinder. As part of our espresso grinder test series, we tested over 24 espresso grinders for their retention. The extent of retention is sometimes surprisingly large. The larger the grinding discs, the more prone a grinder is to temporary retention. This is due to the circumference of the grinding discs, but also the path to the discharge. If the grinding discs are above the discharge or if a grinder is built from top to bottom, retention is usually lower.

    Depending on its size, temporary retention has significant influence on taste, extraction, and the adjustability of the grinder. The coffee powder in retention becomes part of the espresso if it is not first ground out. Thus it influences both taste and extraction. If the coffee powder is only briefly in retention, the influence is lower. If the last pull was made the day before, the coffee tastes unbalanced due to the pre-ground coffee powder and has a rancid tendency. Added to this is that extraction works poorly because the powder cannot build up resistance.

    Grinders with low absolute retention

    In the largest espresso grinder comparison in German-speaking countries, we placed special emphasis on measuring absolute retention. Absolute retention is the sum of temporary and permanent retention. It refers to the area in the grinder where ground coffee is permanently or temporarily held.

    Grinders with the lowest absolute retention are the G-Iota (1.5 g), the Niche Zero (1.1 g), the Rommelsbacher EKM300 (1.5 g), and the Delonghi KG521 (1.4 g). Grinders from the Eureka Mignon series achieve good values with the Magnifico (2.1 g) and the Specialità (2.7 g). The Baratza Sette 270 (2.7 g) and the Rocket Faustino (2.8 g) also remain under 3 g retention. Not all of the grinders mentioned above are good espresso grinders. The extent of retention is only one important parameter.

    Other grinders with low absolute retention:

    retention view

    Retention significance for single dosing and time programming

    Many of the tested grinders performed significantly better as "single dosing" grinders than in their intended mode. They particularly achieved less retention.

    Single dosing is a principle of espresso preparation that developed from barista world championships. Instead of putting the entire coffee amount in the bean hopper, only the desired coffee amount is weighed and ground. The process initially developed with the Mahlkönig EK43, which has no dosing programming. For example, 18 grams of coffee is put in the bean hopper and ground. A good single dosing grinder then ejects all 18 grams. Many grinders achieve this goal more or less well when grinding for 30 seconds. In our test, we tried exactly that. We let the grinders grind for 30 seconds.

    Here, for example, a Lelit PL72 surprised us, which normally has 5 grams of retention. When grinding for 30 seconds, however, it ejected the complete amount of coffee input and thus had no retention.

    This procedure differs significantly from working with the bean hopper. In that case, grinding is stopped after a defined time when the desired target amount is dispensed. But then a large amount of coffee powder remains in retention.

    Especially for grinders with large retention, it is worthwhile to check whether they perform well as single dosing grinders. This has the nice side effect that adjusting the grind setting becomes easier and less coffee is wasted. Switching from one coffee to another is also easier with single dosing.

    retention coffee

    Retention becomes particularly relevant with grind-by-weight grinders: Here retention can also be avoided through single portioning. The differences between models range from 1.5 g to over 7 g – with noticeable impact on cup quality.

    Conclusions on retention

    If you know your grinder, you can work against your own retention and improve the quality of your coffee with a simple trick. At the same time, the grinder becomes easier and better to adjust.

    Before each pull, the coffee powder in temporary retention should be ground out. This especially applies if no coffee has been pulled for a while. We recommend grinding out after just one hour of inactivity. Regular thorough cleaning of the espresso grinder is also important.

    When adjusting the grinder, the old coffee powder should definitely be ground out after each grind setting adjustment. This is the only way the result of the grind setting adjustment is visible in the pull. This is especially crucial for espresso preparation when searching for the perfect grind setting.

    If a grinder has very large absolute retention but performs well as a single dosing grinder (see also our espresso grinder test), the grinder should be used accordingly. This increases quality, makes grinder adjustment easier, and quickly becomes routine. This method of use also allows easy switching from one coffee variety to the next. That's fun!

    Retention is an important topic when it comes to coffee grinder quality. With this blog post, you now know everything important about it.

    Or did we forget something? Feel free to add with your comments, questions, and assessments. Thank you!

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy