Home / Coffee knowledge / Which espresso machine is right for me?
    Espresso
    Welche Espressomaschine passt zu mir?

    Which espresso machine is right for me?

    The espresso machine that meets your needs is the best fit for you. This sounds trivial, but it's actually crucial in determining which espresso machine is right for you.

    Are you an espresso purist? Then a single boiler espresso machine might just do the trick for you.

    Are cappuccino and latte macchiato high on your list? Then a dual circuit espresso machine quickly makes sense.

    Those seeking maximum consistency and performance will be happy with a dual boiler espresso machine.

    In this article, we highlight the differences between the various espresso machine systems: single boiler, dual circuit, and dual boiler. Based on the strengths and weaknesses of these machines, it quickly becomes clear which espresso machine suits you and is therefore the right choice.

    If you want to learn how to prepare espresso step by step, this tutorial with video will help you.

    If you've been using a capsule machine and are now switching to a portafilter machine for the first time, our beginner's guide for capsule switchers provides a good foundation: What changes? What does the transition really cost? And which coffee is right to start with?

    How the single boiler espresso machine works

    A single water circuit runs through the single boiler espresso machine via a single boiler. The boiler's job is to heat the water to the required temperature. For brewing espresso, the ideal temperature depending on the coffee and roast is between 90 and 96 °C.

    Temperature is also needed to steam milk. To generate sufficient steam, the boiler temperature is heated to 120 – 130 degrees. With a single boiler, this must be done with the same boiler that heats the brew water.

    After pulling an espresso with the single boiler system, heating is increased. This is started manually at the push of a button. The small, usually powerful boiler then heats up from brewing temperature to approximately 125 °C. Once the target temperature is reached, you can begin steaming.

    Before pulling further espressos, the boiler temperature must first be brought back down to the brewing temperature of 92 – 96 °C. We've explained this principle in detail using the Rancilio Silvia as an example.

    Illustration of single boiler espresso machineIllustration of single boiler espresso machine

    Temperature surfing – a prerequisite for delicious coffee

    Mastering the temperatures is the prerequisite for good coffee on a single boiler espresso machine. Brewing temperatures that are too high, over 100 °C, result in very unpleasant coffee flavor. The coffee becomes very bitter and sour – both at an intensity level you won't want to drink.

    If you don't achieve sufficiently high temperatures with steam pressure, you won't be happy steaming. At low boiler temperatures, large amounts of water rather than steam are blown into the milk. This makes it impossible to properly steam the milk and it becomes increasingly diluted with water.

    With single boilers, it's absolutely essential to get to know your own espresso machine well in order to estimate the timing between heating and cooling.

    Does the single boiler make good espresso?

    Absolutely! The espresso tastes just as good on the single boiler espresso machine as it does from a small-car-priced commercial espresso machine. The prerequisite is that the temperature is right. And in the single boiler price segment, this usually can't be read from the outside. You have to master temperature control. Or you can forgo the milk steaming function. Then the boiler doesn't have to work for both brewing and steaming and is often better calibrated for the target brewing temperature.

    Pros: What speaks in favor of the single boiler

    • Makes very good espresso when temperature is correct
    • Affordable machines on the market
    • Relatively compact models available
    • Depending on the model, can be heated up for steaming milk
    • The small boiler can heat up and cool down relatively quickly

    Cons: What speaks against the single boiler

    • Not a walk in the park. It requires getting to know the machine to master it.
    • Temperature management required to achieve good drink results.
    • Machine operation can be learned. However, since espresso beginners have so much to learn anyway – such as properly adjusting the grinder and steaming milk – this machine type is in our opinion rather not the perfect beginner machine.
    • Due to the small boiler, lacking temperature consistency.

    Who is the single boiler suitable for? For espresso drinkers and milk steamers with nerves of steel

    Pro tip: If you like tinkering, you can retrofit many single boilers with a PID controller. This promises high temperature stability and turns the single boiler into a machine with high precision – unbeatable in terms of value for money. We'll explain how this works in a later post.

    Examples of single boiler espresso machines

    Lelit Victoria PL91T, Gaggia New Classic, Bezzera Hobby, Lelit Grace PL81T, Lelit Anna PL41 LEM, ECM Classica PID, Bezzera Unica PID, Quick Mill Carola, Rancilio Silvia

    How the thermoblock espresso machine works

    The thermoblock is an alternative to the boiler principle. Instead of a heated water reservoir, a spiral-shaped tube is threaded through an aluminum block. A heating element runs along the tube. The water is heated as it passes through the tube. The process is similar to a continuous flow heater.

    The major advantage over boiler-based espresso machines is the relatively short heat-up time. The heating element heats up quickly. The "block" can be brought up to temperature relatively quickly through a few pulls without coffee.

    The temperature stability of the thermoblock depends on how the tube is installed, its length, the water flow rate, and the heating power. With well-calibrated machines, this is relatively or even very precise in standard operation. Positive examples of this are machines from Ascaso or the Decent espresso machine.

    It becomes problematic when a lot or little coffee is brewed. When pulling many espressos or longer drinks (lungo, café crème-like), the surroundings cool down due to much cold water flowing through, and the water is no longer heated to a sufficient brewing temperature.

    If the water flow is slow – for example, due to very finely ground coffee – the water heats up beyond the target temperature.

    The larger the thermoblock, the better

    With most smaller thermoblock espresso machines, the thermoblock is relatively small. To reach the desired target temperature during the short flow time, the block must therefore be heated significantly higher than the actual target temperature. This further exacerbates the problem described above.

    The larger the thermoblock, the closer the block's temperature is to the actual target temperature and can thus more consistently deliver the desired temperature even at higher or lower output.

    Thermoblock machines are generally not well suited for steaming milk. The pressure built up is relatively low. Additionally, the steam produced has relatively high residual moisture, which significantly dilutes the milk. The pump builds pressure by spraying small amounts of water into the thermoblock, which then evaporates and generates pressure. Due to these pulses, steam also exits the milk wand in bursts, which makes homogeneous steaming difficult. Here too, there are positive counterexamples, such as the Sage Bambino Plus.

    Pros: What speaks in favor of thermoblock espresso machines

    • Quick heat-up
    • Depending on installation and tuning, precise temperature and correspondingly good espresso
    • Minimal scale buildup
    • Relatively affordable

    Cons: What speaks against thermoblock espresso machines

    • Temperature fluctuations depending on flow rate and water volume
    • Dependent on thermoblock size
    • Not well suited for steaming milk

    Examples of thermoblock espresso machines

    Sage Barista Express, Sage Barista Pro, Lelit Glenda PL41, Quick Mill Peagso, ECM Casa V, Lelit Kate PL82T, Ascaso Steel Duo PID, Ascaso Dream PID, Sage Bambino Plus

    Suitable for: Budget-conscious people willing to compromise on quality

    How the dual circuit espresso machine works

    Two water circuits after the pump characterize the dual circuit espresso machine system. A boiler is the central element. This is heated to a temperature of 120 – 130 °C. Steam pressure for milk steaming is taken directly from this boiler. Additionally, a tube runs through the boiler which transports the brew water toward espresso preparation.

    The tube functions as a heat exchanger. As it flows through the tube surrounded by hot water, the fresh water heats up. The hot water in the boiler essentially serves as the thermoblock here.

    The tube wall thickness and "retention" time of the brew water through the boiler is crucial in determining how much the brew water heats up.

    Illustration of dual circuit espresso machineIllustration of dual circuit espresso machine

    With the dual circuit system, steaming milk is a joy

    Dual circuit espresso machines are the favorites of all cappuccino drinkers. The hot boiler generates powerful steam, which allows you to steam milk and pull espresso simultaneously. That's really a huge difference from the single boiler espresso machine, where you have time to meditate between pulling espresso and steaming milk. Temperature surfing is a thing of the past compared to the single boiler.

    The dual circuit also has enough power to pull several espressos in succession. Depending on boiler size, you'll notice a slight performance drop after 2 to 6 steamed milk pitchers. But it's quickly overcome once you give the machine time to heat up again.

    Dual circuit and temperature consistency

    When comparing the temperature fluctuations of the dual circuit with those of the single boiler espresso machine, the difference is striking. But the dual circuit also has its "quirks." The brew water is heated by its retention time in the heat-exchanging tube. If you don't brew an espresso for a while, the brew water temperature matches the ambient temperature. In other words, it's more than boiling hot. That's why flushing – i.e., a blank pull – is very important with heat exchangers. This removes the heated water from the tube and the incoming water is already at temperature.

    If you pull espresso after espresso at a family party, there's a risk that the brewing temperature drops below the 90 °C threshold. This results in sour-tasting espressos and reduced extraction efficiency.

    Pros: What speaks in favor of dual circuit espresso machines

    • Good espresso and steaming capability
    • Simultaneous steaming and brewing is possible (large boiler)
    • Good temperature consistency

    Cons: What speaks against dual circuit espresso machines

    • Machines for the home market are not suitable for large parties or commercial use. Neither the steam pressure nor the brew water temperature can handle it.
    • More expensive than single boiler and thermoblock

    Suitable for: Espresso lovers and cappuccino drinkers.

    Options for dual circuit espresso machines

    Espresso machines with dual circuit systems are available in many variants from numerous retailers. Of course, each machine has certain advantages and disadvantages and different configurations, such as slightly larger or smaller boilers and different aesthetics.

    Two improvements to the dual circuit are particularly noteworthy and change both quality and price.

    PID control

    The PID control option regulates the brew water temperature. You can read a good explanation of how this works here. PID stands for Proportional Integral Derivative.

    PID control helps the espresso machine heat precisely within its setpoint range. The setpoint can be adjusted with a controller, though with dual circuits it's important to note that you're always changing the boiler temperature, which affects both the brew temperature and steam pressure. If the steam pressure is insufficient, the boiler temperature can be increased. However, this also increases the temperature that heats the heat exchanger, which may make longer blank pulls or flushes advisable.

    Rotary pump vs vibration pump

    Another upgrade for the dual circuit is a rotary pump. The rotary pump is more powerful and heavier. The rotary pump is quieter than the vibration pump, which depending on where the espresso machine is located can be beneficial.

    Due to their robustness and power, rotary pumps are standard equipment on multi-group commercial machines.

    Examples of dual circuit espresso machines

    Bezzera BZ10, Quickmill Rubino 0981, Bezzera Magica SMN, Bezzera Strega R AL, Profitec Pro 500, ECM Mechanika V, Elba 1 and 2, Rocket Appartamento, Lelit Mara X, Rocket Cronometro Mozzafiatto, Sanremo Cube

    To get a really good overview of the most important dual circuit models, check out our comparison of 12 dual circuit espresso machines.

    Dual boiler espresso machine – function and application

    No question, if you invest in a dual boiler, you're buying temperature precision that shows with every espresso preparation. Two separate boilers deliver the temperature that's needed. The steam boiler brews at the desired 120 – 130 °C and the brew boiler serves us precisely the set brewing temperature between 90 and 96 °C.

    The juggling act with temperatures comes to an end. The typically larger steam boiler is controlled via a pressurestat to the right pressure. In the brew boiler, a PID controller monitors the brewing temperature to within a tenth of a degree.

    Many dual boilers also come standard with a rotary pump, which contributes to durability through its power and robustness. Durability and consistency in brewing is what characterizes dual boiler systems. Even at higher drink frequency, these machines rarely falter.

    Illustration of dual boiler espresso machine

    Illustration of dual boiler espresso machine

    Consistency from pull to pull and during extraction

    Espresso quality from pull to pull is primarily demonstrated through system reliability. The decisive factors are temperature and pressure with every pull and within each brewing. The consistency during brewing time is a factor we haven't delved into further with the other machine types.

    There, the challenge was already getting the same brew temperature at the beginning. Within a pull, temperature often fluctuates as well. This is because, for example, cooler water flows through the heat exchanger, which encounters less back pressure in the coffee bed in the second part of an espresso pull than in the first part.

    The dual boiler masters consistency here because it's fed from a perfectly tempered water reservoir.

    Steam milk until the stadium is served

    Even if the Kelly Family is visiting, the milk foam keeps flowing. And the best part: should we ever overdo it and empty the steam boiler to exhaustion, the espresso is unaffected. That's the advantage of independent boilers for both functions.

    Steam pressure can be increased by raising the temperature in the steam boiler, thus increasing steaming speed. If you prefer to steam more slowly, you can reduce the pressure a bit. Here too, the brewing temperature is unaffected.

    Semi-professional use

    A single group dual boiler is suitable for small catering, larger family parties, and depending on the type, for continuous operation. Many machines of this type can also be connected to a water line, which is another advantage.

    We regularly use both our La Marzocco Linea, a Dalla Corte Mini, and of course a La Marzocco GS 3 for catering events. What we like about it: unlike commercial machines, those built for household or office use run on standard household current of 220/230 volts. Depending on the location, that's a major advantage.

    Of course, there are also major quality differences between dual boilers, which we'll go into further detail about in our individual machine tests. For machines in the La Marzocco GS 3 quality class, however, we can say that they also look good in a small café as a starting point. If business picks up, another machine of the same type can be added and you've already got a two-group setup. If things are slower, one of the two machines can already be cleaned and "closed down" (restaurant jargon).

    Turn off the steam boiler and save energy

    Sensibly, the steam boiler can be manually deactivated. This makes sense when only espresso drinkers are present. This saves energy and is kinder to the climate and your wallet. For us, this is a crucial quality criterion of a dual boiler.

    The size of the brew boiler is repeatedly a topic of discussion. If it's too large, the brew water sits unnecessarily long in the boiler and is repeatedly heated and replaced only slowly. A larger boiler also takes longer to reach temperature. A larger boiler mainly makes sense when, for example, the whole floor pulls an espresso during the office lunch break.

    Pros: What speaks in favor of dual boiler espresso machines

    • Precise brewing temperature
    • Brewing temperature and steam pressure independent of each other
    • Consistency from pull to pull
    • Consistency within a pull
    • Suitable for semi-professional use (larger guest volume)
    • Some models with commercial components extremely robust and precise

    Cons: What speaks against dual boiler espresso machines

    • High price
    • Dual boiler doesn't always mean PID and rotary pump. Be sure to read more carefully what else is in the machine.

    Examples of dual boiler espresso machines

    Profitec Pro 300 Dual boiler, La Spaziale Dream, Bezzera Duo Top MN, Quick Mill New Vetrano 2B, Rocket R58/Cinquantotto, Bezzera Matrix, ECM Synchonika Dual boiler, Dalla Corte Mini, La Marzocco GS/3, La Marzocco Linea Mini

    Espresso grinder as a basic requirement

    This article deals with the various espresso machine types. The reference to a quality grinder should still be mentioned here in passing. As someone who works with Kaffeemacher both in the hospitality industry and in private households, we repeatedly observe that the choice of coffee grinder is not given sufficient thought. We've seen such absurd combinations as a €7000 CHF/6500 espresso machine paired with a €360 CHF/290 espresso grinder.

    That's simply a shame. The grinder drastically limits the espresso machine's quality in such a scenario. When budgeting for an espresso machine purchase, we recommend reserving at least 1/4, better yet 1/3, of the budget for the grinder. Unevenly ground coffee extracts unevenly and ensures that your espresso quality is limited.

    Conclusion – Which espresso machine is right for you?

    Thermoblock Single boiler Dual circuit Dual boiler
    I only drink espresso! xx xx xxx xxxx
    Cappuccino should happen occasionally. x xx xxxx
    Cappuccino is a regular thing. xx xxxx
    I don't want to invest more than €500/600 CHF. xxxx
    I don't want to invest more than €1000/1200 CHF. xxxx
    The machine should also make coffee at the school summer festival. x xxxx

    Related topics:

    What do you think?

      Welche Maschine sollen wir noch testen?

      Espressomaschine oder Mühle: Sag uns, was als Nächstes auf unseren Testtisch soll. Wir lesen jeden Wunsch.

      Deine E-Mail nutzen wir nur für Rückfragen zu deinem Wunsch. Den Newsletter bekommst du nur, wenn du ihn ankreuzt und bestätigst. Datenschutzerklärung