KM Stainless Steel Steam Wand for DeLonghi Machines

Product Details:

• Precise steam: Steady, directed steam jet instead of an uncontrolled spray nozzle.
• Better texturing: Suitable for fine-pored microfoam.
• More control: Significantly better control over the angle and range of motion while frothing.
• Upgrade instead of replacing: Gets more out of your existing single-boiler machine without having to replace it.

Technical Details:

Compatible machines:

• DeLonghi Dedica EC 680
• DeLonghi Dedica EC 685
• DeLonghi Magnifica S ECAM22.110.SB - Fully automatic

Other machines with an identical connection and steam assembly may also be compatible.

Important notes:

• The wand improves steam volume and control, but it does not turn a single-boiler machine into a professional-grade machine.
• For reproducible results, we recommend using a suitable milk pitcher.
• Flush briefly before frothing to remove condensation from the wand.

Steam Wand Installation Guide

More control. Better microstructure. Finally, properly froth milk with your Dedica. The installation takes less than 5 minutes – if you know how.

Included in delivery

• 1× Stainless steel steam wand
• 1× Transparent sealing ring (for installation)
• Additional sealing rings as spares

Step 1 – Remove the original steam wand

1. Push the original steam wand upwards.
2. At the same time, turn it counter-clockwise.
3. Pull it downwards to remove.
4. Remove the black rubber outlet completely.

Step 2 – Insert the sealing ring

Slide the transparent sealing ring onto the plastic outlet.

The additional sealing rings are only spare parts.

Step 3 – Slide on the new steam wand

Position the new steam wand straight and press it slightly upwards while sliding it on. Push it until it reaches the upper stop.

It must be fully seated at the top.

Step 4 – Secure

Turn it clockwise until the plastic pin is completely seated in the corner.

Tighten hand-tight – do not use tools.

Step 5 – Functional check

• Switch on the machine
• Draw a little steam (without milk)
• Check if any steam is leaking from the sides

Care & our tip

• Clean immediately after every use with a damp cloth
• Let a short burst of steam run to blow out any milk residue
• Regularly check for a secure fit

Our tip: Let steam run for 5–10 seconds before frothing your first milk. This stabilizes the steam and ensures a better microstructure.

How to froth properly?

Why we sell this steam wand

Many small espresso machines are surprisingly powerful when it comes to espresso, but lose quality significantly when it comes to steam. Original steam wands often produce turbulent steam, unreliable vortex formation, and coarse foam.

In our tests, this wand clearly upgraded the Dedica and compatible machines: shorter frothing times, more stable steam, and milk foam that can be poured with control. For anyone wanting a sensible upgrade for their existing machine, this steam wand is a logical step before considering a complete machine replacement.